Search

Foam-assisted web forming and chemical application technologies have great potential to improve manufacturing efficiency and product quality in the paper and nonwovens industries. In this study, the benefits of foam forming and foam-assisted application of chemicals were demonstrated in a pilot machine trial. Uniform high-bulk webs of unrefined bleached softwood kraft pulp (BSKP) and viscose fibers were manufactured by foam forming. It was shown that foam formed low-grammage and high-bulk viscose fiber webs can be strengthened by foam-assisted application of latex onto the wet web. Correspondingly, foam-assisted application of carboxymethyl cellulose (CMC) and anionic polyacrylamide (A-PAM) improved the strength of the foam formed low-grammage and high-bulk BSKP web. Overall, the pilot machine results indicated that material cost savings could be achieved and a high-performance product could be manufactured with foam-based technologies.

WOS:000967659000009 The utilization of plant extraction products from Oeneanthe pimpinelloides (Apiaceae family) seeds were investigated in terms of their use as an insecticide control of packaging materials. The aim was to investigate their insecticidal effects against the flour beetle Tribolium castaneum. The Oeneanthe pimpinelloides seeds were extracted with methanol. By using the liquid-liquid extraction method, the hexane extract (II) was separated from the methanol extract (I) and hexane and methanol were evaporated. Then, the chemical composition of each sample was determined via gas chromatography–mass spectrometry. The methanol extract predominantly contained tetrahydrofuran, 1-methoxy-2-propanol, 1-methoxy, 2-butoxyethanol, 1-phenylethanone, cyclohexene carboxylate derivative, (3-phenyl-2-propynylidene) cyclopropane, diphenyldiazene, and dihydroxypropyl ester components, while the hexane fraction contained nonane, 1-octanol, decane, undecane, tridecane, alkyl benzene, benzene sulfonic acid, benzoxazine, and hexadecanoic acid components, as well as some derivatives of them. Each fraction was dissolved in DMSO for impregnation on filter paper. The insecticide effects of the paper samples were determined against Tribolium castneum. According to the results, the mortality started after 3 d for each fraction. After 4 d, the hexane fraction indicated total mortality in comparison with the methanol fraction, which showed partial mortality (3/5).

Purpose: The aim of this research work is to analyze and compare profitability performance of selected paper companies in India. Approach/Methodology/Design: An analytical study method is employed in this research work by relying on secondary data. In this research work 12 paper companies are selected as a sample based on their higher net sales and the study period are last10 financial years from 2012-13 to 2021-22. Ratio Analysis is used as an accounting tool in which six profitability ratios are employed. One-way ANOVA technique of parametric test is used as a statistical tool to identify the difference among sample means. Findings: The major finding of the research work indicates that in all the selected paper companies the profitability performance of shows fluctuating trend during the study period of 10 years. The overall performance was good and satisfactory in Satia Industries Ltd., JK paper Ltd., Seshasayee Paper and Board Ltd. and NR Agarwal Industries Ltd. and it was low and dissatisfactory in Orient Paper & Industries Ltd. and Astron Paper & Board Mill Ltd. for all the selected profitability ratio during the study period. The results of statistical test revealed that in gross profit ratio, operating profit ratio and return on assets ratio formulated null hypotheses are rejected and in net profit ratio, return on net worth ratio and return on capital employed ratio formulated null hypotheses are accepted. Originality/value: In this research work profitability analysis is carried out which is helpful to know the profitability performance of selected paper companies. The result would help investors to make right choice of investment in selected companies. It would also identify that how efficiently a business can generates profit and value for its shareholders from its sales or operations, shareholders' fund or balance sheet’s assets.

Currently, tissue product producers try to meet consumers’ requirements to retain their loyalty. In perforated products, such as toilet paper, these requirements involve the paper being portioned along the perforation line and not outside of it. Thus, it becomes necessary to enhance the behavior of the perforation line in perforated tissue papers. The current study aimed to verify if the perforation line for 0° (the solution found in commercial perforated products) is the best solution to maximize the perforation efficiency. A finite element (FE) simulation was used to validate the experimental data, where the deviations from the experiments were 5.2% for the case with a 4 mm perforation length and 8.8% for a perforation of 2 mm, and optimize the perforation efficiency using the genetic algorithm while considering two different cases. In the first case, the blank distance and the perforation line angle were varied, with the best configuration being achieved with a blank distance of 0.1 mm and an inclination angle of 0.56°. For the second case, the blank distance was fixed to 1.0 mm and the only variable to be optimized was the inclination angle of the perforation line. It was found that the best angle inclination was 0.67°. In both cases, it was verified that a slight inclination in the perforation line will favor partitioning and therefore the perforation efficiency.

From the end of the nineteenth century and one hundred years onward, home sewing was an important part of many women’s duties, but it was also a pleasure, something that existed parallel with the emerging mass-produced ready-to-wear industry. The paper patterns used for home dressmaking were often sold and distributed through women’s magazines. These pattern sections were both a kind of reader service and a conscious strategy to capture the female target group. This article, based on an analysis of three Swedish magazines, is the first in-depth survey of patterns for home sewing of women’s clothes in Sweden. The study shows how the magazines adapted to changes in society with increasingly easier patterns and ready-cut fabric for their readers. By highlighting women making their clothes in the home, this article contributes to an often-neglected area of women’s memory and fashion history.

Four organic solid wastes (coffee grounds, ground nut shell, paper money sewage sludge and cork powder) have been investigated as bloating inducing agents in lightweight aggregate (LWA) manufacturing when mixed in small proportions (2.5 wt.%) with three types of clays. The pellets obtained were fired in a rotary kiln at the maximum feasible temperature for 4 min. A similar impact was observed both in the working conditions and in the properties of the LWAs, showing that the differences between said residues are not as decisive as those of the clays to which they are added. The organic wastes have played a crucial role in achieving reducing conditions inside the aggregate. Thus, their addition has led to substantial improvements both from an operational point of view, lowering the working temperature, and from a technological perspective, favoring bloating and the development of a highly porous and lightweight structure. Leachate studies have shown that the LWAs meet the regulatory limits. The outcomes of this investigation show that, in line with the precepts of the Circular Economy, the recovery of organic wastes of different nature can have a place in the production of environmentally friendly LWAs

Today, legal regulations, along with social awareness, have made waste management a necessity. Depending on the type of waste, technological developments have enabled an increase in the number of approaches, e.g., reusing, recycling, and manufacturing of different products. In this study, low-density boards were produced using different proportions of office waste paper, wood chips, and chopped E-glass fiber. Waste paper and glass fiber formed the middle layer of the boards and wood chips comprised the surface layers. The density, water absorption, and thickness swelling properties of the boards were investigated. Among the mechanical properties, the modulus of rupture, modulus of elasticity, and internal bond strength were determined. The use of wastepaper led to a reduction in the modulus of rupture and modulus of elasticity of the boards. An increase in the glass fiber ratio contributed positively to the water absorption and thickness swelling properties, whereas it directly led to decreases in the internal bond strength, and the modulus of rupture and modulus of elasticity values. Nonetheless, the low-density boards were able to meet the minimum modulus of rupture and modulus of elasticity specified in ANSI 208.1 standards, while only one variation met the IB requirements., U današnje je vrijeme zakonska regulativa, uz društvenu svijest, gospodarenje otpadom učinila nužnošću. Ovisno o vrsti otpada, tehnološki je razvoj omogućio povećanje broja pristupa gospodarenju otpadom, npr. pri ponovnoj uporabi, recikliranju i proizvodnji različitih proizvoda. Za ovo su istraživanje izrađene ploče niske gustoće s različitim udjelima otpadnoga uredskog papira, drvnog iverja i usitnjenih staklenih vlakana. Pritom su otpadni papir i usitnjena staklena vlakna iskorišteni za izradu središnjeg sloja, a drvno je iverje upotrijebljeno za vanjske slojeve ploča. Izrađene su ploče ispitane i utvrđena je njihova gustoća, moć upijanja vode i debljinsko bubrenje. Dodatno su određeni modul loma, modul elastičnosti i čvrstoća raslojavanja. Rezultati ispitivanja pokazali su da je uporaba otpadnog papira pridonijela smanjenju vrijednosti modula loma i modula elastičnosti. Istodobno je povećanje udjela usitnjenih staklenih vlakana imalo pozitivan učinak na vrijednosti upijanja vode i na debljinsko bubrenje, ali je izravno utjecalo i na smanjenje čvrstoće raslojavanja, modula loma i modula elastičnosti. Ipak, izrađene ploče niske gustoće zadovoljile su minimalne zahtjeve norme ANSI 208.1 glede modula loma i modula elastičnosti, a samo je jedna skupina eksperimentalno izrađenih ploča zadovoljila uvjete čvrstoće raslojavanja.

In the research of the review of this creative and innovation area that can benefit community and nation. The review that had been picked in this research was the paper. The aim of this review is to explain about the advantages or the benefits of paper and also the used of the paper, also the improvement of the nation by the helps of the paper production and innovation. The methods that we going to describe in this review was the involvement of the paper production in many fields, such as for individuals, schools, medical centre and so on. There are a lot of information and new knowledges that we going to present and cite in this review. The conclusion of this article review was to be making sure that everyone knows the important and the properties of the paper in our country.

The aim of this white paper is to draw attention to the roles and responsibilities of higher education and research organisations in addressing gender-based violence. These roles and responsibilities may not be recognised or are downplayed, and this results in institutions failing to take appropriate action to ensure safe environments for students and staff. Secondly, the white paper aims to explicate the essential features and elements of effective policies and actions and lastly, to highlight the critical role of institutional leadership in making the policy frameworks and actions work. This white paper is primarily intended for: institutional leaders and top management; staff responsible for the design, adoption and implementation of institutional policies; staff appointed to support victims and survivors; and any other member of the academic community committed to ending gender-based violence. It builds on the results of the UniSAFE research, including the prevalence study (Lipinsky et al. 2022, Humbert et al. 2022), the institutional policy analysis (Huck et al. 2022), case studies (Ranea-Triviño et al. 2022), interviews (Blazyte and Pilinkaite 2022), and stakeholder and expert workshops (Yellow Window 2023a, 2023b), the purpose of which have been to gain insight into and test emerging policy solutions.

The object of research in this scientific paper is the treatment of waste generated by paper production in industrial landfills. In the part of the paper production process, i.e. in its subsystem for wastewater treatment, a significant amount of solid waste is generated, which ends up in industrial landfills. The reason for the impossibility of returning to the production process lies in the fact that the sludge contains larger amounts of moisture and present chemical components that are isolated in the paper production process or during wastewater treatment. In the experimental part of the paper, a “trial plot” was selected on which seedlings of the paulownia elongate plant were planted in the waste sludge. The process of plant growth was monitored for two years and bioremediation, i.e. transfer of elements from sediments to plants, was analysed by modern instrumental methods. Based on the results obtained by research, it can be said with certainty that Paulownia elongate can be used in bioremediation of areas where these sediments are deposited.

In an article to study the effect of sizing agent and filler on the structural features of paper from the cellulose mass of the inner layer of the bark of mulberry tree branches, mechanical strength, absorbency and sorption properties were studied. Tensile strength was determined on a tensile testing machine by the force causing the destruction of the sample. Surface absorbency at one side wetting was determined by the method of Cobb(30), by determining the mass of water absorbed by the surface of the paper when wetting one side of the test sample. Sorption properties were studied on a high-vacuum setup with mercury gates and McBain quartz balances according to water vapor sorption data. It was found that the internal 2% sizing of the paper pulp with cherry tree resin glue contributes to the strengthening of the paper structure, which is confirmed by the values of mechanical strength and surface absorbency when unilaterally wetted with water, relative to the values obtained when sizing with pine oleoresin rosin glue. When using glue from cherry resin, it is advisable to add 2 g of kaolin to 100 g of pulp from the inner layer of the bark of mulberry tree branches, since the increase negatively affects mechanical strength and hydrophobicity., В статье для исследования влияния проклеивающего вещества и наполнителя на структурные особенности бумаги из целлюлозной массы внутреннего слоя коры веток тутового дерева изучены механическая прочность, впитывающая способность и сорбционные свойства. Прочность на разрыв при растяжении определяли на разрывной машине по усилию, вызывающему разрушение образца. Поверхностную впитываемость при одностороннем смачивании определяли по методу Кобб(30), путем определения массы воды, поглощенной поверхностью бумаги при смачивании одной стороны испытуемого образца. Сорбционные свойства исследовали на высоковакуумной установке с ртутными затворами и кварцевыми весами Мак-Бена по данным сорбции паров воды. Выявлено, что внутренняя 2%-ная проклейка бумажной массы клеем из живицы черешневого дерева способствует упрочнению структуры бумаги, что подтверждается значениями механической прочности и поверхностной впитываемостью при одностороннем смачивании водой, относительно значений, полученных при проклейке канифольным клеем из сосновой живицы. При использовании клея из живицы черешневого дерева целесообразно к 100 г целлюлозной массы из внутреннего слоя коры веток тутового дерева добавлять каолин в количестве 2 г, так как увеличение отрицательно влияет на механическую прочность и гидрофобность.

Lead (Pb) pollution from local mines and industrial use increases risks for human, animal, and plant health. Pectin is an effective chelator of Pb, and it has been shown that a unicellular green alga, Penium margaritaceum, synthesizes pectin in the cell wall. In this study, the ability of P. margaritaceum to remove Pb from an aqueous solution was investigated. Energy dispersive X-ray spectroscopy revealed that two strains of P. margaritaceum accumulated Pb on the cell surface. Hence, P. margaritaceum cells were immobilized on cellulose filter paper. The immobilized algal cells were soaked in 1.0 mg/L Pb solution with gentle shaking for 8 h, and Pb in the solution and on the filter paper was measured by flame atomic absorption spectrometry. The immobilized algal cells continuously decreased the Pb concentration to less than 0.5 mg/L and recovered 31.8–32.7% of added Pb. The specific decrease in Pb and increase in Ca were observed in the presence of 1.0 mg/L each of Ca, Mg, Na, and K. Fourier transform infrared spectra suggested that the carboxylic acid group would be responsible for the adsorption of Pb. This study is the first to demonstrate the effectiveness of the immobilized P. margaritaceum cell in removing Pb from aqueous solutions with simple solid–liquid separation.