Search

The accurate prediction of heavy precipitation in convective environments is crucial because such events, often occurring in Italy during the summer and fall seasons, can be a threat for people and properties. In this paper, we analyse the impact of satellite-derived surface-rainfall-rate data assimilation on the Weather Research and Forecasting (WRF) model's precipitation prediction, considering 15 days in summer 2022 and 17 days in fall 2022, where moderate to intense precipitation was observed over Italy. A 3DVar realised at CNR-ISAC (National Research Council of Italy, Institute of Atmospheric Sciences and Climate) is used to assimilate two different satellite-derived rain rate products, both exploiting geostationary (GEO), infrared (IR), and low-Earth-orbit (LEO) microwave (MW) measurements: One is based on an artificial neural network (NN), and the other one is the operational P-IN-SEVIRI-PMW product (H60), delivered in near-real time by the EUMETSAT HSAF (Satellite Application Facility in Support of Operational Hydrology and Water Management). The forecast is verified in two periods: the hours from 1 to 4 (1–4 h phase) and the hours from 3 to 6 (3–6 h phase) after the assimilation. The results show that the rain rate assimilation improves the precipitation forecast in both seasons and for both forecast phases, even if the improvement in the 3–6 h phase is found mainly in summer. The assimilation of H60 produces a high number of false alarms, which has a negative impact on the forecast, especially for intense events (30 mm/3 h). The assimilation of the NN rain rate gives more balanced predictions, improving the control forecast without significantly increasing false alarms. [ABSTRACT FROM AUTHOR]

Remote images are useful tools for detecting and monitoring landslides, including shallow landslides in agricultural environments. However, the use of non-commercial satellite images to detect the latter is limited because their spatial resolution is often comparable to or greater than landslide sizes, and the spectral characteristics of the pixels within the landslide body (LPs) are often comparable to those of the surrounding pixels (SPs). The buried archaeological remains are also often characterized by sizes that are comparable to image spatial resolutions and the spectral characteristics of the pixels overlying them (OBARPs) are often comparable to those of the pixels surrounding them (SBARPs). Despite these limitations, satellite images have been used successfully to detect many buried archaeological remains since the late 19th century. In this research context, some methodologies, which examined the values of OBARPs and SBARPs, were developed to rank images according to their capability to detect them. Based on these previous works, this paper presents an updated methodology to detect shallow landslides in agricultural environments. Sentinel-2 and Google Earth (GE) images were utilized to test and validate the methodology. The landslides were mapped using GE images acquired simultaneously or nearly simultaneously with the Sentinel-2 data. A total of 52 reference data were identified by monitoring 14 landslides over time. Since remote sensing indices are widely used to detect landslides, 20 indices were retrieved from Sentinel-2 images to evaluate their capability to detect shallow landslides. The frequency distributions of LPs and SPs were examined, and their differences were evaluated. The results demonstrated that each index could detect shallow landslides with sizes comparable to or smaller than the spatial resolution of Sentinel-2 data. However, the overall accuracy values of the indices varied from 1 to 0.56 and two indices (SAVI and RDVI) achieved overall accuracy values equal to 1. Therefore, to effectively distinguish areas where shallow landslides are present from those where they are absent, it is recommended to apply the methodology to many image processing products. In conclusion, given the significant impact of these landslides on agricultural activity and surrounding infrastructures, this methodology provides a valuable tool for detecting and monitoring landslide presence in such environments. [ABSTRACT FROM AUTHOR]

Services from the Continuously Operating Reference Stations (CORS) of the Global Navigation Satellite System (GNSS) provide data and insights to a range of research areas such as physical sciences, engineering, earth and planetary sciences, computer science, and environmental science. Even though these fields are varied, they are all linked through the GNSS operational application. GNSS CORS have historically been deployed for three-dimensional positioning but also for the establishment of local and global reference systems and the measurement of ionospheric and tropospheric errors. In addition to these studies, CORS is uncovering new, emerging scientific applications. These include real-time monitoring of land subsidence via network real-time kinematics (NRTK) or precise point positioning (PPP), structural health monitoring (SHM), earthquake and volcanology monitoring, GNSS reflectometry (GNSS-R) for mapping soil moisture content, precision farming with affordable receivers, and zenith total delay to aid hydrology and meteorology. The flexibility of CORS infrastructure and services has paved the way for new research areas. The aim of this study is to present a curated selection of scientific papers on prevalent topics such as network monitoring, reference frames, and structure monitoring (like dams), along with an evaluation of CORS performance. Concurrently, it reports on the scientific endeavours undertaken by the Geomatics Research Group at the University of Palermo in the realm of GNSS CORS over the past 15 years. [ABSTRACT FROM AUTHOR]

Xylella Fastidiosa has been recently detected for the first time in southern Italy, representing a very dangerous phytobacterium capable of inducing severe diseases in many plants. In particular, the disease induced in olive trees is called olive quick decline syndrome (OQDS), which provokes the rapid desiccation and, ultimately, death of the infected plants. In this paper, we analyse about two thousands pixels of MODIS satellite evapotranspiration time series, covering infected and uninfected olive groves in southern Italy. Our aim is the identification of Xylella Fastidiosa-linked patterns in the statistical features of evapotranspiration data. The adopted methodology is the well-known Fisher–Shannon analysis that allows one to characterize the time dynamics of complex time series by means of two informational quantities, the Fisher information measure (FIM) and the Shannon entropy power (SEP). On average, the evapotranspiration of Xylella Fastidiosa-infected sites is characterized by a larger SEP and lower FIM compared to uninfected sites. The analysis of the receiver operating characteristic curve suggests that SEP and FIM can be considered binary classifiers with good discrimination performance that, moreover, improves if the yearly cycle, very likely linked with the meteo-climatic variability of the investigated areas, is removed from the data. Furthermore, it indicated that FIM exhibits superior effectiveness compared to SEP in discerning healthy and infected pixels. [ABSTRACT FROM AUTHOR]

Analysis of a series of thermal mappings obtained by UAS flights on quiescent volcanoes requires some special techniques to be performed. The main challenge is represented by the difficulty of separating hot and cold pixels in areas where their temperatures are quite similar. This task is indeed much simpler, for example, for lava flows where the temperature differences between the hot lava and the cold soil is rather big. This paper shows various software developed in order to perform this extraction and calculate the trends over time of both the average temperature and the heat flux from the soil. This prototypal implementation used thermal flights performed over a time span of a few years on an area in the Campi Flegrei caldera in southern Italy. Standard image manipulation techniques were used to segmentate and clusterise each thermal mapping in order to reduce the thermal anomalies to some sets of simpler features characterised by their fundamental parameters. The temporal trends of some physical parameters (temperature, heat flux, etc.) were extracted from these sets, and we found interesting results necessary for correlations and for ongoing research with other parameters. [ABSTRACT FROM AUTHOR]

In this paper, we complete pioneering research that indicates the very low frequency (VLF) signal amplitude and phase noise reductions, and short-period wave excitations and attenuations as new potential earthquake precursors. We consider changes in the VLF signal broadcast in Italy by the ICV transmitter and recorded in Serbia that start a few tens of minutes before earthquakes. The sampling interval of the analyzed data is 0.1 s. The main objectives of this study are (1) to complete this research in the time and frequency domains during the periods of the four earthquakes analyzed in the previous studies, and (2) to define the parameters of the VLF signal amplitude and phase in both domains that should be further examined in statistical analyses of the aforementioned potential earthquake precursors. In the first part of this study, we analyze the ICV signal amplitude in the frequency domain during the period around three earthquakes that occurred in November 2010 near the considered signal propagation path. Here, we apply the Fourier transform to the relevant recorded data. In the second part, we compare characteristics of the signal amplitude and phase noise reductions in the time domain, and wave excitations and attenuations in the frequency domain. The results of these comparisons indicate the parameters that should be analyzed in subsequent studies to confirm the connection of the considered VLF signal changes with seismic activity before earthquakes, and potentially establish procedures for their detection are: (a) the start and end times of the noise reductions in the time domain and the excited/attenuated waves in the frequency domain, (b) the differences in the corresponding times, and (c) the wave periods of wave excitations of both the signal amplitude and phase. [ABSTRACT FROM AUTHOR]

This paper provides an assessment of a 24 GHz multiple-input multiple-output radar as a remote sensing tool to retrieve bathymetric maps in coastal areas. The reconstruction procedure considered here exploits the dispersion relation and has been previously employed to elaborate the data acquired via X-band marine radar. The estimation capabilities of the sensor are investigated firstly on synthetic radar data. With this aim, case studies referring to sea waves interacting with a constant and a spatially varying bathymetry are both considered. Finally, the reconstruction procedure is tested by processing real data recorded at Bagnoli Bay, Naples, South Italy. The preliminary results shown here confirm the potential of the radar sensor as a tool for sea wave monitoring. [ABSTRACT FROM AUTHOR]

Illegal archaeological excavations, generally denoted as looting, is one of the most important damage factors to cultural heritage, as it upsets the human occupation stratigraphy of sites of archaeological interest. Looting identification and monitoring are not an easy task. A consolidated instrument used for the detection of archaeological features in general, and more specifically for the study of looting is remote sensing. Nevertheless, passive optical remote sensing is quite ineffective in dense vegetated areas. For these type of areas, in recent decades, LiDAR data and its derivatives have become an essential tool as they provide fundamental information that can be critical not only for the identification of unknown archaeological remains, but also for monitoring issues. Actually, LiDAR can suitably reveal grave robber devastation, even if, surprisingly, up today LiDAR has been generally unused for the identification of looting phenomenon. Consequently, this paper deals with an approach devised ad hoc for LiDAR data to detect looting. With this aim, some spatial visualization techniques and the geomorphon automatic landform extraction were exploited to enhance and extract features linked to the grave robber devastation. For this paper, the Etruscan site of San Giovenale (Northern Lazio, Italy) was selected as a test area as it is densely vegetated and was deeply plundered throughout the 20th century. Exploiting the LiDAR penetration capability, the prediction ability of the devised approach is highly satisfactory with a high rate of success, varying from 85–95%. [ABSTRACT FROM AUTHOR]

Coastal managers, policymakers, and scientists use shoreline accretion/erosion trends to determine the coastline's historical evolution and generate models capable of predicting future changes. Different solutions have been developed to obtain shoreline positions from Earth observation data in recent years, the so-called Satellite-Derived Shorelines (SDS). Most of the methodologies available in the literature use multispectral optical satellite imagery. This paper proposes two new methods for shoreline mapping at the subpixel level based on PRISMA hyperspectral imagery. The first one analyses the spectral signatures along defined beach profiles. The second method uses techniques more commonly applied to multispectral image analysis, such as Spectral Unmixing algorithms and Spatial Attraction Models. The results obtained with both methodologies are validated on three Mediterranean microtidal beaches located in two different countries, Italy and Greece, using image-based ground truth shorelines manually photointerpreted and digitised. The obtained errors are around 6 and 7 m for the first and second methods, respectively. These results are comparable to the errors obtained from multispectral data. The paper also discusses the capability of the two methods to identify two different shoreline proxies. [ABSTRACT FROM AUTHOR]

Deep-seated gravitational slope deformations (DsGSDs) are slope-scale phenomena which are widespread in mountainous regions. Despite interacting with human infrastructures and settlements, only a few cases are monitored with ground-based systems. Remote sensing technologies have recently become a consolidated instrument for monitoring and studying such widespread and slow processes. This paper proposes a three-step novel methodology to analyze the morpho-structural domain of DsGSDs by exploiting the advanced Differential Synthetic Aperture Radar Interferometry (A-DInSAR) technique through (i) the analysis of A-DInSAR measurement point density and distribution defining a coverage threshold; (ii) the assessment of the actual ground deformation with respect to the orientation of phenomena based on slope, aspect, and C-index; and (iii) ground deformation mapping with previously ranked velocity interpolation. The methodology was tested on two differently oriented phenomena: the mainly north–south-oriented Croix de Fana and the mainly east–west-oriented Valtournenche DsGSD, located in the Aosta Valley Region, northern Italy. The results show a variation in the kinematic behavior between the morpho-structural domains, while also considering any other superimposed surficial deformations. This work provides the lines for the implementation of a rapid and low-cost tool based on the use of A-DInSAR measurements which are suitable for assessing the impact of any type of DsGSD on the anthropic facilities and infrastructures in mountainous areas. [ABSTRACT FROM AUTHOR]

This paper presents a study on applying satellite Interferometric Synthetic Aperture Radar (InSAR) technology for the remote monitoring of road bridges and interpreting the results from a structural standpoint. The motivation behind this study arises from the widespread deterioration observed in many road bridges worldwide, leading to the need for large-scale, economic, and effective structural health monitoring (SHM) techniques. While traditional contact-type sensors have cost sustainability limitations, remote sensing techniques, including satellite-based InSAR, offer interesting alternative solutions. The objective of this study is three-fold: (i) to process InSAR data specifically for road bridges in operational conditions through the Multi-Temporal InSAR technique and extract displacement time series of reflective targets on their decks; (ii) to interpret the observed millimetric bridge displacements to verify the consistency with expected response to environmental loads and the possibility to detect unexpected behaviours; and (iii) to investigate the correlation between bridge displacements and environmental loads as temperature and river water flow variations. The study focuses on the multi-span prestressed concrete A22 Po River Bridge in Italy, utilising a dataset of X-Band HIMAGE mode Stripmap images acquired over eight years by the satellite constellation COSMO-SkyMed. The study demonstrates the effectiveness of InSAR-based SHM in detecting temperature-induced displacements and identifying different bridge spans simply by studying the sign of the correlation between displacements and temperature variation. It also reveals an unexpected behaviour in a portion of the bridge retrofitted to prevent scour issues a few years before the dataset start date. Furthermore, the correlation between pier displacements and river level variations underscores the importance of considering environmental factors and the geotechnical characteristics of the foundation soils in bridge monitoring. The results obtained from this study are significant with a view to using this satellite InSAR-based monitoring for early detection of anomalous bridge behaviour on a large scale. [ABSTRACT FROM AUTHOR]

The study reported in this paper concerns the temporal variation in the b-value of the Gutenberg–Richter frequency–magnitude law, applied to the earthquakes that struck Italy from 2009 to 2016 in the geographical areas of L'Aquila, the Emilia Region, and Amatrice–Norcia. Generally, the b-value varies from one region to another dependent on earthquake incidences. Higher values of this parameter are correlated to the occurrence of low-magnitude events spread over a wide geographical area. Conversely, a lower b-value may lead to the prediction of a major earthquake localized along a fault. In addition, it is observed that each seismic event has a different "occurrence time", which is a key point in the statistical study of earthquakes. In particular, its results are absolutely different for each specific event, and may vary from years to months or even just a few hours. Hence, both short- and long-term precursor phenomena have to be examined. Accordingly, the b-value analysis has to be performed by choosing the best time windows to study the foreshock and aftershock activities. [ABSTRACT FROM AUTHOR]

This work describes a procedure for building a high-quality 3D model of a rocky pinnacle in the Dolomites, Italy, using Structure from Motion (SfM) techniques. The pinnacle, known as "Campanile di Val Montanaia", is challenging to survey due to its high elevation and sub-vertical cliffs. The construction of the 3D model is the first step in a multi-disciplinary approach to characterize the rock mass and understand its behavior and evolution. This paper discusses the surveying operations, which involved climbing the pinnacle to collect Ground Control Points (GCPs) and using a UAV to capture aerial imagery. The photographs were processed using SfM software to generate point clouds, mesh, and texture, which were then used for rock mass discontinuity mapping. The study compares models of different qualities and point densities to determine the optimal trade-off between processing time and accuracy in terms of discontinuity mapping. The results show that higher quality models allow for more detailed mapping of discontinuities, with some drawbacks due to noise in the case of the densest solution (e.g., increase in frequency of outliers across the point cloud). These pros and cons are also discussed in relation to the computational cost necessary to build the models. The study also examines the limitations and challenges of performing discontinuity mapping in the different models, including subjectivity in interpretation. A further element of interest is the publication of a high-quality 3D georeferenced model of the "Campanile di Val Montanaia" to be used for several potential further applications, such as stability analyses and numerical modeling. [ABSTRACT FROM AUTHOR]

Traditional soil characterization methods are time consuming, laborious and invasive and do not allow for long-term repeatability of measurements. The overall aim of this paper was to assess and model spatial variability of the soil in an olive grove in south Italy by using data from two sensors of different types: a multi-spectral on-board drone radiometer and a hyperspectral visible-near infrared-shortwave infrared (VIS-NIR-SWIR) reflectance radiometer, as well as sample data, to arrive at a delineation of homogeneous areas. The hyperspectral data were processed using Continuum Removal (CR) methodology to obtain information about the content and composition of clay. Differently, the multispectral data were firstly upscaled to the support of soil data using geostatistics and taking into account the change of support. Secondly, the data acquired with the two different sensors were integrated with soil granulometric properties by using two multivariate geostatistical techniques: multi-collocated cokriging to achieve a more exhaustive and finer-scale soil characterization, and multi-collocated factor cokriging to extract synthetic scale-dependent indices (regionalized factors) for the delineation of soil in homogeneous zones. This paper shows the impact of change of support on the uncertainty of soil prediction that can have a significant effect on decision making in Precision Agriculture. Moreover, four regionalized factors at two different scales (two for each scale) were retained and mapped. Each factor provided a different delineation of the field with areas characterized by different granulometries and clay compositions. The applied method is sufficiently flexible and could be applied to any number and type of sensors. [ABSTRACT FROM AUTHOR]

In the second half of the twentieth century, after the end of the Second World War, a considerable anthropogenic pressure was observed in most of the Mediterranean territories. This process has caused the expansion of existing settlements and the construction of numerous new towns, often located very close to rivers. A frequent consequence of this process is the transformation of several rivers through planform changes, narrowing, channelization and culverting to recover spaces where inhabited centers expanded, and the construction of structures interacting with rivers. This issue is very important in territories such as the Metropolitan City of Reggio Calabria, in southern Italy, which is an interesting case study due to the considerable anthropogenic pressures observed in the last 70 years. The main goal of this paper is to evaluate the effects of anthropogenic pressure in the last 70 years on some rivers of the Metropolitan City of Reggio Calabria in terms of the following issues: planform changes, channelization, culverting, and the presence of structures and infrastructures interacting with rivers. The specific goals of this paper are the quantification of the effects of anthropogenic pressure on the rivers of the study area analyzing sixteen parameters, the identification of possible conditions of hydraulic hazard through the analysis of past events, and the proposal of structural and non-structural mitigation interventions. In many rivers of the study area, the significant effects of anthropogenic pressure are visible through rivers that pass above highways, barred rivers, rivers replaced by roads and numerous crossing roads with a missing levee. [ABSTRACT FROM AUTHOR]

Lightning is an important threat to life and properties and its forecast is important for several applications. In this paper, we show the performance of the "dynamic lightning scheme" for next-day total strokes forecast. The predictions were compared against strokes recorded by a ground observational network for a forecast period spanning one year. Specifically, a total of 162 case studies were selected between 1 March 2020 and 28 February 2021, characterized by at least 3000 observed strokes over Italy. The events span a broad range of lightning intensity from about 3000 to 600,000 strokes in one day: 69 cases occurred in summer, 46 in fall, 18 in winter, and 29 in spring. The meteorological driver was the Weather Research and Forecasting (WRF) model (version 4.1) and we focused on the next-day forecast. Strokes were simulated by adding three extra variables to WRF, namely, the potential energies for positive and negative cloud to ground flashes and intracloud strokes. Each potential energy is advected by WRF, it is built by the electrification processes occurring into the cloud, and it is dissipated by lightning. Observed strokes were remapped onto the WRF model grid with a 3 km horizontal resolution for comparison with the strokes forecast. Results are discussed for the whole year and for different seasons. Moreover, statistics are presented for the land and the sea. In general, the results of this study show that lightning forecast with the dynamic lightning scheme and WRF model was successful for Italy; nevertheless, a careful inspection of forecast performance is necessary for tuning the scheme. This tuning is dependent on the season. A numerical experiment changing the microphysics scheme used in WRF shows the sensitivity of the results according to the choice of the microphysics scheme. [ABSTRACT FROM AUTHOR]

Volcanic plume height is one the most important features of explosive activity; thus, it is a parameter of interest for volcanic monitoring that can be retrieved using different remote sensing techniques. Among them, calibrated visible cameras have demonstrated to be a promising alternative during daylight hours, mainly due to their low cost and low uncertainty in the results. However, currently these measurements are generally not fully automatic. In this paper, we present a new, interactive, open-source MATLAB tool, named 'Plume Height Analyzer' (PHA), which is able to analyze images and videos of explosive eruptions derived from visible cameras, with the objective of automatically identifying the temporal evolution of eruption columns. PHA is a self-customizing tool, i.e., before operational use, the user must perform an iterative calibration procedure based on the analysis of images of previous eruptions of the volcanic system of interest, under different eruptive, atmospheric and illumination conditions. The images used for the calibration step allow the computation of ad hoc expressions to set the model parameters used to recognize the volcanic plume in new images, which are controlled by their individual characteristics. Thereby, the number of frames used in the calibration procedure will control the goodness of the model to analyze new videos/images and the range of eruption, atmospheric, and illumination conditions for which the program will return reliable results. This also allows improvement of the performance of the program as new data become available for the calibration, for which PHA includes ad hoc routines. PHA has been tested on a wide set of videos from recent explosive activity at Mt. Etna, in Italy, and may represent a first approximation toward a real-time analysis of column height using visible cameras on erupting volcanoes. [ABSTRACT FROM AUTHOR]

Structural Health Monitoring (SHM) represents a very powerful tool to assess the health condition of buildings. In recent years, the growing availability of high-resolution SAR satellite images has made possible the application of multi-temporal Interferometric Synthetic Aperture Radar (MT-InSAR) techniques for structural monitoring purposes, with high precision, low costs, timesaving, and the possibility to investigate wide areas. However, a comprehensive validation of the effectiveness of MT-InSAR in this application field has not been achieved yet. For this reason, in this paper a comparison between interferometric data and on-site measurement of displacements is proposed. The application case study is the Civic Tower of the city of L'Aquila (Abruzzo Region, Italy). After the seismic events that affected the area in 2009, an on-site monitoring system was installed on the tower to detect any changes in the damage pattern in the period 2010–2013. Furthermore, images acquired by COSMO-SkyMed constellation in Stripmap mode (~3 m resolution) during the same period were processed by the Permanent Scatterer-InSAR (PSI) technique to estimate the deformation of the structure and the surrounding area. The obtained results indicate that both methods are consistent in the measurement of displacement trends of the building and a slight rotation/displacement of the tower was detected. Such evidence highlights both the huge potential and the limitations of using InSAR techniques for SHM. [ABSTRACT FROM AUTHOR]

An interdisciplinary study of the ancient landscape of the Trieste Karst (north-eastern Italy) is presented in this paper. Airborne Laser Scanning (ALS) has been applied to obtain high-resolution topography of the 25 km2 investigated area in order to identify potential archaeological anomalies. The ALS-derived high-resolution Digital Terrain Models have been visualized and managed using QGIS and Relief Visualization Toolbox. Possible archaeological anomalies have been verified through field surveys and interpreted using a multidisciplinary approach mainly based on the collection of associated archaeological materials and geomorphological and stratigraphic evidence. From a methodological perspective, the elaboration and study of ALS-derived images, and in particular the local relief model visualization, combined with the collection of Roman shoe hobnails, have proven to be effective approaches for the certain identification and dating of Roman roads in karst environments. The obtained results have revealed an almost completely unknown Roman landscape: the investigated area was crossed by important public roads, whose layout has been accurately reconstructed for a total length of over 10 km, and occupied by large country estates, sometimes enclosed within boundary walls perfectly fitting the Roman land division grid. One of the identified buildings could correspond to a road station, perhaps the Avesica known from ancient itinerary documents—i.e., the itinerarium Antonini Augusti—due to its position and proximity to a major road junction. [ABSTRACT FROM AUTHOR]

The modeling and simulation of topography-induced imaging distortions are crucial for consistent radiometric information exploitation in current and forthcoming SAR-based Earth observation missions with a high spatial and temporal resolution, with relevance in several applications. In this paper, for the first time, we specifically investigate the compensation of topography-induced radiometric distortions affecting SAR images acquired by the L-band Argentinian satellite SAOCOM. We adopt a recently developed calibration method relying on an analytical formulation derived in the rigorous framework of the differential geometry of surfaces. We first provide an original interpretation of the analytical formulation, thus providing further insights into the relevant area-stretching-based formalism. Then, the numerical implementation of the method is specialized to systematically process the data acquired by SAOCOM sensors; hence, the resulting sensor-specific prototype solution processor is employed in this study. Finally, experiments performed over a real scenario in the southern part of Italy, characterized by large topography variations, are presented and discussed, thus elucidating the effectiveness of the adopted method applied to SAOCOM images. The adopted effective SAR calibration strategy opens up the way to its operational use in large-scale SAOCOM data processing. [ABSTRACT FROM AUTHOR]

Satellite interferometry has recently developed as a powerful tool for monitoring displacements on structures for structural health monitoring (SHM), as it allows obtaining information on past deformation and performing back analysis on structural behavior. Despite the increasing literature on this subject, the lack of protocols for applying and interpreting interferometric data for structural assessment prevents these techniques from being employed alongside conventional SHM. This paper proposes a methodology for exploiting satellite interferometric data aiming at remotely detecting displacements and buildings' criticalities at different levels of analysis, i.e., urban scale and single-building scale. Moreover, this research exploits the capability of satellite monitoring for damage diagnosis, comparing the millimeter scale displacements to information derived from on-site inspections. Different data-driven algorithms were applied to detect seasonal and irreversible components of displacements, such as statistical models for damage identification derived from traditional on-site monitoring. Thus, the proposed methodology was applied to a XVI-century case study located in the city center of Rome (Italy), Palazzo Primoli, and two stocks of COSMO-SkyMed (CSK) images processed through the Small BAseline Subset Differential Interferometry (SBAS-DInSAR) technique were used to assess displacements for an eight-year-long (between 2011 and 2019) monitoring period. [ABSTRACT FROM AUTHOR]

Earth flows are complex gravitational events characterised by a heterogeneous displacement pattern in terms of scale, style, and orientation. As a result, their monitoring, for both knowledge and emergency purposes, represents a relevant challenge in the field of engineering geology. This paper aims to assess the capabilities, peculiarities, and limitations of different remote sensing monitoring techniques through their application to the Pietrafitta earth flow (Southern Italy). The research compared and combined data collected during the main landslide reactivations by different ground-based remote sensors such as Robotic Total Station (R-TS), Terrestrial Synthetic Aperture Radar Interferometry (T-InSAR), and Terrestrial Laser Scanner (TLS), with data being derived by satellite-based Digital Image Correlation (DIC) analysis. The comparison between R-TS and T-InSAR measurements showed that, despite their different spatial and temporal resolutions, the observed deformation trends remain approximately coherent. On the other hand, DIC analysis was able to detect a kinematic process, such as the expansion of the landslide channel, which was not detected by the other techniques used. The results suggest that, when faced with complex events, the use of a single monitoring technique may not be enough to fully observe and understand the processes taking place. Therefore, the limitations of each different technique alone can be solved by a multi-sensor monitoring approach. [ABSTRACT FROM AUTHOR]

In this paper, we propose a processing chain jointly employing Sentinel-1 and Sentinel-2 data, aiming to monitor changes in the status of the vegetation cover by integrating the four 10 m visible and near-infrared (VNIR) bands with the three red-edge (RE) bands of Sentinel-2. The latter approximately span the gap between red and NIR bands (700 nm–800 nm), with bandwidths of 15/20 nm and 20 m pixel spacing. The RE bands are sharpened to 10 m, following the hyper-sharpening protocol, which holds, unlike pansharpening, when the sharpening band is not unique. The resulting 10 m fusion product may be integrated with polarimetric features calculated from the Interferometric Wide (IW) Ground Range Detected (GRD) product of Sentinel-1, available at 10 m pixel spacing, before the fused data are analyzed for change detection. A key point of the proposed scheme is that the fusion of optical and synthetic aperture radar (SAR) data is accomplished at level of change, through modulation of the optical change feature, namely the difference in normalized area over (reflectance) curve (NAOC), calculated from the sharpened RE bands, by the polarimetric SAR change feature, achieved as the temporal ratio of polarimetric features, where the latter is the pixel ratio between the co-polar and the cross-polar channels. Hyper-sharpening of Sentinel-2 RE bands, calculation of NAOC and modulation-based integration of Sentinel-1 polarimetric change features are applied to multitemporal datasets acquired before and after a fire event, over Mount Serra, in Italy. The optical change feature captures variations in the content of chlorophyll. The polarimetric SAR temporal change feature describes depolarization effects and changes in volumetric scattering of canopies. Their fusion shows an increased ability to highlight changes in vegetation status. In a performance comparison achieved by means of receiver operating characteristic (ROC) curves, the proposed change feature-based fusion approach surpasses a traditional area-based approach and the normalized burned ratio (NBR) index, which is widespread in the detection of burnt vegetation. [ABSTRACT FROM AUTHOR]

Mapping urban areas from space is a complex task involving the definition of what should be considered as part of an urban agglomerate beyond the built-up features, thus modelling the transition of a city into the surrounding landscape. In this paper, a new technique to map urban areas using multitemporal synthetic aperture radar data is presented. The proposed methodology exploits innovative RGB composites in combination with self-organizing map (SOM) clustering and object-based image analysis. In particular, the clustered product is used to extract a coarse urban area map, which is then refined using object-based processing. In this phase, Delaunay triangulation and the spatial relationship between the identified urban regions are used to model the urban–rural gradient between a city and the surrounding landscape. The technique has been tested in different scenarios representative of structurally different cities in Italy and Germany. The quality of the obtained products is assessed by comparison with the Urban Atlas of the European Environmental Agency, showing good agreement with the adopted reference data despite their different taxonomies. [ABSTRACT FROM AUTHOR]

In this paper, characterization of the optical and microphysical properties of extremely fresh biomass burning aerosol is presented. This work aims to characterize, for the first time to our knowledge, freshly formed smoke particles observed only a few minutes after they were emitted from a nearby forest fire. The smoke particles were detected by combining passive (sun-photometer) and active (Raman lidar) techniques. On 14 August 2021, an EARLINET (European Aerosol Research Lidar Network) multi-wavelength Raman lidar and a co-located AERONET sun-photometer in Potenza, South Italy, observed an extremely fresh smoke plume. The lidar measurements, carried out from 22:27 to 02:16 UTC, revealed a thick biomass burning layer below 2.7 km. The particle depolarization ratio at 532 nm was 0.025, and lidar ratios at 355 and 532 nm were, respectively, 40 and 38 sr. The mean value of the Ångström exponent was 1.5. The derived size distribution was bimodal with a peak at 0.13 µm, an effective radius mean value of 0.15 µm, and a single scattering albedo of 0.96 at all wavelengths. The real part of the refractive index was 1.58 and the imaginary was 0.006. The AERONET measurements at 5:34 UTC confirmed the lidar measurements. [ABSTRACT FROM AUTHOR]

This paper explored the relationship between acidic sulfate alteration, geostructural frameworks, and geomorphological changes that can be observed in active volcanic hydrothermal systems. The target area was Pisciarelli in the Campi Flegrei volcano, where diffuse acidic sulfate alteration and hydrothermal dynamics have been growing since 2012, causing a progressive deterioration of landscapes. Terrestrial Laser Scanner (TLS), photogrammetry of proximity survey, geological field work, mineralogical and geochemical analysis with Optical Microscopy (OM), electron microscopy, and energy dispersive micro-analysis (BSEM-EDS) and X-ray Powder Diffraction (XRPD) to characterize (and monitor) altered rock outcrops were repeatedly carried out in the area. We present the multi-temporal acquisition and analysis referring to Terrestrial Laser Scanning (TLS) datasets (2014 survey) with 3D-point clouds obtained from the Structure for Motion (SfM) photogrammetry (2021 survey) with a high-resolution digital camera aimed at evaluating volumetric changes on the mostly damaged and altered fault scarp. For each survey, we obtained a vertical Digital Elevation Model (DEM) and a true color RGB orthomosaic that provided the setting of the area at the different times and its evolution through their comparison. Changing sites were examined in the field and characterized for mineralogical and geochemical purposes. The investigated slope lost up to about 4 m3 of deposits between 2014 and 2021, mostly related to hydrothermal alteration induced by gas emissions and meteoric infiltration. Our methodological approach appears promising to evaluate evolution and rock-fall susceptibility of solfataric terrains subjected to hydrothermal dynamics. [ABSTRACT FROM AUTHOR]

The Etna volcano is renowned worldwide for its extraordinary lava fountains that rise several kilometers above the vent and feed eruptive columns, then drift hundreds of kilometers away from the source. The Italian Istituto Nazionale di Geofisica e Vulcanologia-Osservatorio Etneo (INGV-OE) is responsible for the monitoring of Mt. Etna, and for this reason, has deployed a network of visible and thermal cameras around the volcano. From these cameras, INGV-OE keeps a keen eye, and is able to observe the eruptive activity, promptly advising the civil protection and aviation authorities of any changes, as well as quantifying the spread of lava flows and the extent of pyroclastic and ash plumes by using a careful analysis of the videos recorded by the monitoring cameras. However, most of the work involves analysis carried out by hand, which is necessarily approximate and time-consuming, thus limiting the usefulness of these results for a prompt hazard assessment. In addition, the start of lava fountains is often a gradual process, increasing in strength from Strombolian activity, to intermediate explosive activity, and eventually leading to sustained lava fountains. The thresholds between these different fields (Strombolian, Intermediate, and lava fountains) are not clear cut, and are often very difficult to distinguish by a manual analysis of the images. In this paper, we presented an automated routine that, when applied to thermal images and with good weather conditions, allowed us to detect (1) the starting and ending time of each lava fountain, (2) the area occupied by hot pyroclasts, (3) the elevation reached by the lava fountains over time, and (4) eventually, to calculate in real-time the erupted volume of pyroclasts, giving results close to the manual analysis but more focused on the sustained portion of the lava fountain, which is also the most dangerous. This routine can also be applied to other active volcanoes, allowing a prompt and uniform definition of the timing of the lava fountain eruptive activity, as well as the magnitude and intensity of the event. [ABSTRACT FROM AUTHOR]

In March 2019, the PRISMA (PRecursore IperSpettrale della Missione Applicativa) hyperspectral satellite was launched by the Italian Space Agency (ASI), and it is currently operational on a global basis. The mission includes the hyperspectral imager PRISMA working in the 400–2500 nm spectral range with 237 bands and a panchromatic (PAN) camera (400–750 nm). This paper presents an evaluation of the PRISMA top-of-atmosphere (TOA) L1 products using different in situ measurements acquired over a fragmented rural area in Southern Italy (Pignola) between October 2019 and July 2021. L1 radiance values were compared with the TOA radiances simulated with a radiative transfer code configured using measurements of the atmospheric profile and the surface spectral characteristics. The L2 reflectance products were also compared with the data obtained by using the ImACor code atmospheric correction tool. A preliminary assessment to identify PRISMA noise characteristics was also conducted. The results showed that: (i) the PRISMA performance, as measured at the Pignola site over different seasons, is characterized by relative mean absolute differences (RMAD) of about 5–7% up to 1800 nm, while a decrease in accuracy was observed in the SWIR; (ii) a coherent noise could be observed in all the analyzed images below the 630th scan line, with a frequency of about 0.3–0.4 cycles/pixel; (iii) the most recent version of the standard reflectance L2 product (i.e., Version 2.05) matched well the reflectance values obtained by using the ImACor atmospheric correction tool. All these preliminary results confirm that PRISMA imagery is suitable for an accurate retrieval of the bio-geochemical variables pertaining to a complex fragmented ecosystem such as that of the Southern Apennines. Further studies are needed to confirm and monitor PRISMA data performance on different land-cover areas and on the Radiometric Calibration Network (RadCalNet) targets. [ABSTRACT FROM AUTHOR]

On 20 May 2012, an Mw 5.8 earthquake, followed by an Mw 5.6 event nine days later, struck the Emilia-Romagna region in northern Italy, causing substantial damage and loss of life. Post-mainshock, several water-related phenomena were observed, such as changes in the groundwater levels in wells, the expulsion of sand–water mixtures, and widespread liquefaction evidence such as sand boils and water leaks from cracks. We analyzed the Earth's surface displacement during and after the Emilia 2012 seismic sequence using synthetic aperture radar images from the COSMO-SkyMed satellite constellation. This analysis revealed post-seismic ground subsidence between the Sant'Agostino and Mirabello villages. Specifically, the displacement time series showed a slight initial uplift followed by rapid subsidence over approximately four to five months. This widespread ground displacement pattern likely stemmed from the extensive liquefaction of saturated sandy layers at depth. This phenomenon typically induces immediate post-seismic subsidence. However, the observed asymptotic subsidence, reaching about 2.1 cm, suggested a time-dependent process related to post-liquefaction consolidation. To test this hypothesis, we analytically estimated the consolidation subsidence resulting from earthquake-induced excess pore pressure dissipation in the layered soil deposits. The simulated subsidence matched the observed data, further validating the significant role of excess pore pressure dissipation induced by earthquake loading in post-seismic ground subsidence. [ABSTRACT FROM AUTHOR]

Landslides recurrently impact the Italian territory, producing huge economic losses and casualties. Because of this, there is a large demand for monitoring tools to support landslide management strategies. Among the variety of remote sensing techniques, Interferometric Synthetic Aperture Radar (InSAR) has become one of the most widely applied for landslide studies. This work reviews a variety of InSAR-related applications for landslide studies in Italy. More than 250 papers were analyzed in this review. The first application dates back to 1999. The average production of InSAR-related papers for landslide studies is around 12 per year, with a peak of 37 papers in 2015. Almost 70% of the papers are written by authors in academia. InSAR is used (i) for landslide back analysis (3% of the papers); (ii) for landslide characterization (40% of the papers); (iii) as input for landslide models (7% of the papers); (iv) to update landslide inventories (15% of the papers); (v) for landslide mapping (32% of the papers), and (vi) for monitoring (3% of the papers). Sixty-eight percent of the authors validated the satellite results with ground information or other remote sensing data. Although well-known limitations exist, this bibliographic overview confirms that InSAR is a consolidated tool for many landslide-related applications. [ABSTRACT FROM AUTHOR]

Rockslides are one of the most dangerous hazards in mountainous and hilly areas. In this study, a rockslide that occurred on 30 November 2022 in Castrocucco, a district located in the Italian municipality of Maratea (Potenza province) in the Basilicata region, was investigated by using pre- and post-event high-resolution 3D models. The event caused a great social alarm as some infrastructures were affected. The main road to the tourist hub of Maratea was, in fact, destroyed and made inaccessible. Rock debris also affected a beach club and important boat storage for sea excursions to Maratea. This event was investigated by using multiscale and multisensor close-range remote sensing (LiDAR and SfM) to determine rockslide characteristics. The novelty of this work lies in how these data, although not originally acquired for rockslide analysis, have been integrated and utilized in an emergency at an almost inaccessible site. The event was analyzed both through classical geomorphological analysis and through a quantitative comparison of multi-temporal DEMs (DoD) in order to assess (i) all the morphological features involved, (ii) detached volume (approximately 8000 m3), and (iii) the process of redistributing and reworking the landslide deposit in the depositional area. [ABSTRACT FROM AUTHOR]

The increasing availability of SAR images and processing results over wide areas determines the need for systematic procedures to extract the information from this dataset and exploit the enhanced quality of the displacement time series. The aim of the study is to propose a new pre-operational workflow of an A-DInSAR-based land subsidence monitoring and interpretation service. The workflow is tested in Turano Lodigiano (Lombardy region, Italy) using COSMO-SkyMed data, processed using the SqueeSAR™ algorithm, and covering the time span from 2016 to 2019. The test site is a representative peri-urban area of the Po plain susceptible to land subsidence. The results give insight about new value-added products and enable non-expert users to exploit the potential of the interferometric results. [ABSTRACT FROM AUTHOR]

Coastal and underwater archaeological sites pose significant challenges in terms of investigation, conservation, valorisation, and management. These sites are often at risk due to climate change and various human-made impacts such as urban expansion, maritime pollution, and natural deterioration. However, advances in remote sensing (RS) and Earth observation (EO) technologies applied to cultural heritage (CH) sites have led to the development of various techniques for underwater cultural heritage (UCH) exploration. The aim of this work was the evaluation of an integrated methodological approach using ultra-high-resolution (UHR) bathymetric data to aid in the identification and interpretation of submerged archaeological contexts. The study focused on a selected area of the submerged Archaeological Park of Baia (Campi Flegrei, south Italy) as a test site. The study highlighted the potential of an approach based on UHR digital bathymetric model (DBM) derivatives and the use of machine learning and statistical techniques to automatically extract and discriminate features of archaeological interest from other components of the seabed substrate. The results achieved accuracy rates of around 90% and created a georeferenced vector map similar to that usually drawn by hand by archaeologists. [ABSTRACT FROM AUTHOR]

Over the past two decades, the airborne Light Detection and Ranging (LiDAR) system has become a useful tool for acquiring high-resolution topographic data, especially in active tectonics studies. Analyzing Digital Terrain Models (DTMs) from LiDAR exposes morpho-structural elements, aiding in the understanding of fault zones, among other applications. Despite its effectiveness, challenges persist in regions with rapid deformation, dense vegetation, and human impact. We propose an adapted workflow transitioning from the conventional airborne LiDAR system to the usage of drone-based LiDAR technology for higher-resolution data acquisition. Additionally, drones offer a more cost-effective solution, both in an initial investment and ongoing operational expenses. Our goal is to demonstrate how drone-based LiDAR enhances the identification of active deformation features, particularly for earthquake-induced surface faulting. To evaluate the potential of our technique, we conducted a drone-based LiDAR survey in the Casamicciola Terme area, north of Ischia Island, Italy, known for the occurrence of destructive shallow earthquakes, including the 2017 Md = 4 event. We assessed the quality of our acquired DTM by comparing it with existing elevation datasets for the same area. We discuss the advantages and limitations of each DTM product in relation to our results, particularly when applied to fault mapping. By analyzing derivative DTM products, we identified the fault scarps within the Casamicciola Holocene Graben (CHG) and mapped its structural geometry in detail. The analysis of both linear and areal geomorphic features allowed us to identify the primary factors influencing the current morphological arrangement of the CHG area. Our detailed map depicts a nested graben formed by two main structures (the Maio and Sentinella faults) and minor internal faults (the Purgatorio and Nizzola faults). High-resolution DEMs acquired by drone-based LiDAR facilitated detailed studies of the geomorphology and fault activity. A similar approach can be applied in regions where the evidence of high slip-rate faults is difficult to identify due to vegetation cover and inaccessibility. [ABSTRACT FROM AUTHOR]

This work aims to show the potential of imaging spectroscopy in assessing water quality and aquatic vegetation in Lake Trasimeno, Italy. Hyperspectral reflectance data from the PRISMA, DESIS and EnMAP missions (2019–2022, summer periods) were compared with in situ measurements from WISPStation and used as inputs for water quality product generation algorithms. The bio-optical model BOMBER was run to simultaneously retrieve water quality parameters (Chlorophyll-a (Chl-a) and Total Suspended Matter, (TSM)) and the coverage of submerged and emergent macrophytes (SM, EM); value-added products, such as Phycocyanin concentration maps, were generated through a machine learning approach. The results showed radiometric agreement between satellite and in situ data, with R2 > 0.9, a Spectral Angle < 10° and water quality mapping errors < 30%. Both SM and EM coverage varied significantly from 2019 (135 ha, 0 ha, respectively) to 2022 (2672 ha, 343 ha), likely influenced by changes in rainfall and lake levels. The areas of greatest variability in Chl-a and TSM were identified in the littoral zones in the western side of the lake, while the highest variation in the fractional cover of SM and density of EM were observed in the south-eastern region; this information could support the water authorities' monitoring activities. To this end, further developments to improve the reference field data for the validation of water quality products are recommended. [ABSTRACT FROM AUTHOR]

This study is a continuation of pilot research on the relationships between seismic activity and changes in very low frequency (VLF) signals starting a few minutes or a few dozen minutes before an earthquake. These changes are recorded in the time and frequency domains and their duration can be influenced not only by the strongest earthquake but also by others that occur in a short time interval. This suggests that there are differences in these changes in cases of individual earthquakes and during the period of intense seismic activity (PISA). In a recent study, they were validated in the time domain by comparing the amplitude noise reductions during the PISA and before earthquakes that occurred in the analysed periods without intense seismic activity (PWISA). Here, we analyse the changes in the VLF signal amplitude in the frequency domain during the PISA and their differences are compared to the previously investigated relevant changes during PWISA. We observe the signal emitted by the ICV transmitter in Italy and received in Serbia from 26 October to 2 November 2016 when 907 earthquakes occurred in Central Italy. The study is based on analyses of the Fourier amplitude A F obtained by applying the fast Fourier transform (FFT) to the values of the ICV signal amplitude sampled at 0.1 s. The obtained results confirm the existence of one of the potential earthquake precursors observed during PWISA: significantly smaller values of A F for small wave periods (they can be smaller than 10 − 3 dB) than under quiet conditions (the expected values are larger than 10 − 2 dB). Exceptions were the values of A F for wave periods between 1.4 s and 2 s from a few days before the observed PISA to almost the end of that period. They were similar or higher than the values expected under quiet conditions. The mentioned decrease lasted throughout the observed longer period from 10 October to 10 November, with occasional normalisation. It was many times longer than the decreases in A F around the considered earthquakes during PWISA, which lasted up to several hours. In addition, no significant wave excitations were recorded at discrete small values of the wave periods during the PISA, as was the case for earthquakes during PWISA. These differences indicate the potential possibility of predicting the PISA if the corresponding earthquake precursors are recorded. Due to their importance for potential warning systems, they should be analysed in more detail in future statistical studies. [ABSTRACT FROM AUTHOR]

One of the most promising applications of satellite data is providing users in charge of land and emergency management with information and data to support decision making for geohazard mapping, monitoring and early warning. In this work, we consider ground displacement data obtained via interferometric processing of satellite radar imagery, and we provide a novel post-processing approach based on a Functional Data Analysis paradigm capable of detecting precursors in displacement time series. The proposed approach appropriately accounts for the spatial and temporal dependencies of the data and does not require prior assumptions on the deformation trend. As an illustrative case, we apply the developed method to the identification of precursors to a mud volcano eruption in the Santa Barbara village in Sicily, southern Italy, showing the advantages of using a Functional Data Analysis framework for anticipating the warning signal. Indeed, the proposed approach is able to detect precursors of the paroxysmal event in the time series of the locations close to the eruption vent and provides a warning signal months before a scalar approach would. The method presented can potentially be applied to a wide range of geological events, thus representing a valuable and far-reaching monitoring tool. [ABSTRACT FROM AUTHOR]

The paper explores the potential of the satellite advanced differential synthetic aperture radar interferometry (A-DInSAR) technique for the identification of impending slope failure. The advantages and limitations of satellite InSAR in monitoring pre-failure landslide behaviour are addressed in five different case histories back-analysed using data acquired by different satellite missions: Montescaglioso landslide (2013, Italy), Scillato landslide (2015, Italy), Bingham Canyon Mine landslide (2013, UT, USA), Big Sur landslide (2017, CA, USA) and Xinmo landslide (2017, China). This paper aimed at providing a contribution to improve the knowledge within the subject area of landslide forecasting using monitoring data, in particular exploring the suitability of satellite InSAR for spatial and temporal prediction of large landslides. The study confirmed that satellite InSAR can be successful in the early detection of slopes prone to collapse; its limitations due to phase aliasing and low sampling frequency are also underlined. According to the results, we propose a novel landslide predictability classification discerning five different levels of predictability by satellite InSAR. Finally, the big step forward made for landslide forecasting applications since the beginning of the first SAR systems (ERS and Envisat) is shown, highlighting that future perspectives are encouraging thanks to the expected improvement of upcoming satellite missions that could highly increase the capability to monitor landslides' pre-failure behaviour. [ABSTRACT FROM AUTHOR]

Local and Regional Authorities require indicators at the intra-urban scale to design adequate policies to foster the achievement of the objectives of Sustainable Development Goal (SDG) 11. Updated high-resolution population density and settlement maps are the basic input products for such indicators and their sub-indicators. When provided at the intra-urban scale, these essential variables can facilitate the extraction of population flows, including both local and regular migrant components. This paper discusses a modification of the dasymetric method implemented in our previous work, aimed at improving the population density estimation. The novelties of our paper include the introduction of building height information and site-specific weight values for population density correction. Based on the proposed improvements, selected indicators/sub-indicators of four SDG 11 targets were updated or newly implemented. The output density map error values are provided in terms of the mean absolute error, root mean square error and mean absolute percentage indicators. The values obtained (i.e., 2.3 and 4.1 people, and 8.6%, respectively) were lower than those of the previous dasymetric method. The findings suggest that the new methodology can provide updated information about population fluxes and processes occurring over the period 2011–2020 in the study site—Bari city in southern Italy. [ABSTRACT FROM AUTHOR]

This paper presents the main results of the GB-InSAR (ground based interferometric synthetic aperture radar) monitoring of the Capriglio landslide (Northern Apennines, Emilia Romagna Region, Italy), activated on 6 April 2013. The landslide, triggered by prolonged rainfall, is constituted by two main adjacent enlarging bodies with a roto-translational kinematics. They activated in sequence and subsequently joined into a large earth flow, channelizing downstream of the Bardea Creek, for a total length of about 3600 m. The displacement rate of this combined mass was quite high, so that the landslide toe evolved with velocities of several tens of meters per day (with peaks of 70-80 m/day) in the first month, and of several meters per day (with peaks of 13-14 m/day) from early May to mid-July 2013. In the crown area, the landslide completely destroyed a 450 m sector of provincial roadway S.P. 101, and its retrogression tendency exposed the villages of Capriglio and Pianestolla, located in the upper watershed area of the Bardea Creek, to great danger. Furthermore, the advancing toe seriously threatened the Antria bridge, representing the "Massese" provincial roadway S.P. 665R transect over the Bardea Creek, the only strategic roadway left able to connect the above-mentioned villages. With the final aim of supporting local authorities in the hazard assessment and risk management during the emergency phase, on 4 May 2013 aerial optical surveys were conducted to accurately map the landslide extension and evolution. Moreover, a GB-InSAR monitoring campaign was started in order to assess displacements of the whole landslide area. The versatility and flexibility of the GB-InSAR sensors allowed acquiring data with two different configurations, designed and set up to continuously retrieve information on the landslide movement rates (both in its upper slow-moving sectors and in its fast-moving toe). The first acquisition mode revealed that the Capriglio and Pianestolla villages were affected by minor displacements (at an order of magnitude of a few millimeters per month). The second acquisition mode allowed to acquire data every 28 seconds, reaching very high temporal resolution values by applying the GB-InSAR technique. [ABSTRACT FROM AUTHOR]

This paper discusses the application of the Cross-Correlation Analysis (CCA) technique to multi-spatial resolution Earth Observation (EO) data for detecting and quantifying changes in forest ecosystems in two different protected areas, located in Southern Italy and Southern India. The input data for CCA investigation were elaborated from the forest layer extracted from an existing Land Cover/Land Use (LC/LU) map (time T1) and a more recent (T2, with T2 > T1) single date image. The latter consist of a High Resolution (HR) Landsat 8 OLI image and a Very High Resolution (VHR) Worldview-2 image, which were analysed separately. For the Italian site, the forest layer (1:5000) was first compared to the HR Landsat 8 OLI image and then to the VHR Worldview-2 image. For the Indian site, the forest layer (1:50,000) was compared to the Landsat 8 OLI image then the changes were interpreted using Worldview-2. The changes detected through CCA, at HR only, were compared against those detected by applying a traditional NDVI image differencing technique of two Landsat scenes at T1 and T2. The accuracy assessment, concerning the change maps of the multi-spatial resolution outputs, was based on stratified random sampling. The CCA technique allowed an increase in the value of the overall accuracy: from 52% to 68% for the Italian site and from 63% to 82% for the Indian site. In addition, a significant reduction of the error affecting the stratified changed area estimation for both sites was obtained. For the Italian site, the error reduction became significant at VHR (±2 ha) in respect to HR (±32 ha) even though both techniques had comparable overall accuracy (82%) and stratified changed area estimation. The findings obtained support the conclusions that CCA technique can be a useful tool to detect and quantify changes in forest areas due to both legal and illegal interventions, including relatively inaccessible sites (e.g., tropical forest) with costs remaining rather low. The data obtained through CCA intervention could not only support the commitments undertaken by the European Habitats Directive (92/43/EEC) and the Convention of Biological Diversity (CBD) but also satisfy UN Sustainable Development Goals (SDG). [ABSTRACT FROM AUTHOR]

Mapping soil organic carbon (SOC) stock can serve as a resilience indicator for climate change. As part of the carbon dioxide (CO2) sink, soil has recently become an integral part of the global carbon agenda to mitigate climate change. We used hyperspectral remote sensing to model the SOC stock in the Sele River plain located in the Campania region in southern Italy. To this end, a soil spectral library (SSL) for the Campania region was combined with an aerial hyperspectral image acquired with the AVIRIS–NG sensor mounted on a Twin Otter aircraft at an altitude of 1433 m. The products of this study were four raster layers with a high spatial resolution (1 m), representing the SOC stocks and three other related soil attributes: SOC content, clay content, and bulk density (BD). We found that the clay minerals' spectral absorption at 2200 nm has a significant impact on predicting the examined soil attributes. The predictions were performed by using AVIRIS–NG sensor data over a selected plot and generating a quantitative map which was validated with in situ observations showing high accuracies in the ground-truth stage (OC stocks [RPIQ = 2.19, R2 = 0.72, RMSE = 0.07]; OC content [RPIQ = 2.27, R2 = 0.80, RMSE = 1.78]; clay content [RPIQ = 1.6 R2 = 0.89, RMSE = 25.42]; bulk density [RPIQ = 1.97, R2 = 0.84, RMSE = 0.08]). The results demonstrated the potential of combining SSLs with remote sensing data of high spectral/spatial resolution to estimate soil attributes, including SOC stocks. [ABSTRACT FROM AUTHOR]

The interpretation of high-resolution remote-sensed data (i.e., LiDAR-derived DTMs, aerial photos and satellite images), compared with ground-penetrating radar surveys, historical cartography, geomorphological surveys and stratigraphic data, allowed us to map a large system of dunes near the Grado-Marano Lagoon (NE Italy) and reconstruct its evolution. Remote sensing investigations allowed us to recognize, map and interpret the sandy reliefs as a field of continental aeolian landforms extending for over 15 km2 and consisting of parabolic dunes elongated in the WSW direction. Radar soundings, together with the description of stratigraphic sections and cores, documented the internal clinostratification of the dunes, supporting their aeolian origin. Radiocarbon dating documents that the dunes formed 22 ka ago, at the end of the Last Glacial Maximum, and probably evolved until the first part of the Late Glacial, when vegetation was scarce. The landforms were fed by the sands blown from a paleochannel of Isonzo River flowing eastward of the dune's field and blown by Bora. This is a very strong katabatic wind, still characterizing the area, but that was likely much stronger during last glaciation, when it was probably sustained by a stronger wind pattern in Central Europe. [ABSTRACT FROM AUTHOR]

Monitoring soil organic carbon (SOC) typically assumes conducting a labor-intensive soil sampling campaign, followed by laboratory testing, which is both expensive and impractical for generating useful, spatially continuous data products. The present study leverages the power of machine learning (ML) and, in particular, deep neural networks (DNNs) for segmentation, as well as satellite imagery, to estimate the SOC remotely. We propose a new two-stage pipeline for remote SOC estimation, which relies on using a DNN trained to classify land cover to perform feature extraction, while the SOC estimation is performed by a different ML model. The first stage is an image segmentation DNN with the U-Net architecture, which is trained to estimate the land cover for an observed geographical region, based on multi-spectral images taken by the Sentinel-2 satellite constellation. This estimator is subsequently used to extract the latent feature vector for each of the output pixels, by rolling back from the output (dense) layer of the U-Net and accessing the last available convolutional layer of the same dimension as our desired output. The second stage is trained on a set of feature vectors extracted at the coordinates for which manual SOC measurements exist. We tested a variety of ML models and report on their performance. Using the best extremely randomized trees model, we generated a spatially continuous map of SOC estimations for the region of Tuscany, in Italy, with a resolution of 10 m, to share with the researchers as a means of validating the results and to demonstrate the efficiency of the proposed approach, which can can easily be scaled to create a global continuous SOC map. [ABSTRACT FROM AUTHOR]

How accurately do Sentinel-2 (S2) images describe vine row spatial variability? Can they produce effective management zones (MZs) for precision viticulture? S2 and UAV datasets acquired over two years for different drip-irrigated vineyards in the Colli Morenici region (northern Italy) were used to assess the actual need to use UAV-NDVI maps instead of S2 images to obtain effective MZ maps. First, the correlation between S2 and UAV-NDVI values was investigated. Secondly, contingency matrices and dichotomous tables (considering UAV-MZ maps as a reference) were developed to compare MZ maps produced using S2 and UAV imagery. Moreover, data on grape production and quality were analyzed through linear discrimination analyses (LDA) to evaluate the effectiveness of S2-MZs and UAV-MZs to explain spatial variability in yield and quality data. The outcomes highlight that S2 images can be quite good tools to manage fertilization based on the within-field vigor variability, of which they capture the main features. Nevertheless, as S2-MZs with low and high vigor were over-estimated, S2-MZ maps cannot be used for high-accuracy input management. From the LDA results, the UAV-MZs appeared slightly more performant than the S2-MZs in explaining the variability in grape quality and yield, especially in the case of low-vigor MZs. [ABSTRACT FROM AUTHOR]

This paper introduces a methodology for predicting and mapping surface motion beneath road pavement structures caused by environmental factors. Persistent Scatterer Interferometric Synthetic Aperture Radar (PS-InSAR) measurements, geospatial analyses, and Machine Learning Algorithms (MLAs) are employed for achieving the purpose. Two single learners, i.e., Regression Tree (RT) and Support Vector Machine (SVM), and two ensemble learners, i.e., Boosted Regression Trees (BRT) and Random Forest (RF) are utilized for estimating the surface motion ratio in terms of mm/year over the Province of Pistoia (Tuscany Region, central Italy, 964 km2), in which strong subsidence phenomena have occurred. The interferometric process of 210 Sentinel-1 images from 2014 to 2019 allows exploiting the average displacements of 52,257 Persistent Scatterers as output targets to predict. A set of 29 environmental-related factors are preprocessed by SAGA-GIS, version 2.3.2, and ESRI ArcGIS, version 10.5, and employed as input features. Once the dataset has been prepared, three wrapper feature selection approaches (backward, forward, and bi-directional) are used for recognizing the set of most relevant features to be used in the modeling. A random splitting of the dataset in 70% and 30% is implemented to identify the training and test set. Through a Bayesian Optimization Algorithm (BOA) and a 10-Fold Cross-Validation (CV), the algorithms are trained and validated. Therefore, the Predictive Performance of MLAs is evaluated and compared by plotting the Taylor Diagram. Outcomes show that SVM and BRT are the most suitable algorithms; in the test phase, BRT has the highest Correlation Coefficient (0.96) and the lowest Root Mean Square Error (0.44 mm/year), while the SVM has the lowest difference between the standard deviation of its predictions (2.05 mm/year) and that of the reference samples (2.09 mm/year). Finally, algorithms are used for mapping surface motion over the study area. We propose three case studies on critical stretches of two-lane rural roads for evaluating the reliability of the procedure. Road authorities could consider the proposed methodology for their monitoring, management, and planning activities. [ABSTRACT FROM AUTHOR]

In this paper, the authors present a recent integrated survey carried out on an archaeological urban site, generally free of buildings, except some temporary structures related to excavated areas where multi-chamber tombs were found. The two methods used to investigate this site were thermal infrared and ground penetrating radar (GPR). The thermography was carried out with the sensor mounted under a helium balloon simultaneously with a photographic camera. In order to have a synthetic view of the surface thermal behavior, a simplified version of the existing night thermal gradient algorithm was applied. By this approach, we have a wide extension of thermal maps due to the balloon oscillation, because we are able to compute the maps despite collecting few acquisition samples. By the integration of GPR and the thermal imaging, we can evaluate the depth of the thermal influence of possible archaeological targets, such as buried Punic tombs or walls belonging to the succeeding medieval buildings, which have been subsequently destroyed. The thermal anomalies present correspondences to the radar time slices obtained from 30 to 50 cm. Furthermore, by superimposing historical aerial pictures on the GPR and thermal imaging data, we can identify these anomalies as the foundations of the destroyed buildings. [ABSTRACT FROM AUTHOR]

Mosquito-borne diseases have been spreading across Europe over the past two decades, with climate change contributing to this spread. Temperature and precipitation are key factors in a mosquito's life cycle, and are greatly affected by climate change. Using a machine learning framework, Earth Observation data, and future climate projections of temperature and precipitation, this work studies three different cases (Veneto region in Italy, Upper Rhine Valley in Germany and Pancevo, Serbia) and focuses on (i) evaluating the impact of climate factors on mosquito abundance and (ii) long-term forecasting of mosquito abundance based on EURO-CORDEX future climate projections under different Representative Concentration Pathways (RCPs) scenarios. The study shows that increases in precipitation and temperature are directly linked to increased mosquito abundance, with temperature being the main driving factor. Additionally, as the climatic conditions become more extreme, meaning higher variance, the mosquito abundance increases. Moreover, we show that in the upcoming decades mosquito abundance is expected to increase. In the worst-case scenario (RCP8.5) Serbia will face a 10% increase, Italy around a 40% increase, and Germany will reach almost a 200% increase by 2100, relative to the decade 2010–2020. However, in terms of absolute numbers both in Italy and Germany, the expected increase is similar. An interesting finding is that either strong (RCP2.6) or moderate mitigation actions (RCP4.5) against greenhouse gas concentration lead to similar levels of future mosquito abundance, as opposed to no mitigation action at all (RCP8.5), which is projected to lead to high mosquito abundance for all cases studied. [ABSTRACT FROM AUTHOR]

Italy is famous for its one-of-a-kind landscapes and the many cultural heritage sites characterizing the story of its regions. In central Italy, during the medieval age, some of them were built on the top of high and steep cliffs, often on the top of ancient ruins, to protect urban agglomerations, goods and people. The geographical locations of these centers allowed them to maintain their original conformation over time, but, at the same time, exposed them to a high risk of landslides. In this context, this research aimed to present an integrated and low-cost approach to study the potential landslide phenomena affecting two medieval towns. Field surveys and mapping were carried out through the use of innovative digital mapping tools to create a digital database directly on the field. Data gathered during field surveys were integrated with GIS analyses for an improved interpretation of the geological and geomorphological features. Due to the inaccessibility of the cliffs surrounding the two villages, a more detailed analysis of these areas was performed through the use of unmanned aerial vehicle-based photogrammetry, while advanced differential synthetic aperture radar interferometry (A-DInSAR) interpretation was undertaken to verify the stability of the buildings in proximity to the cliffs and other potential active failures. The results of the study highlighted the similar geometry and structural settings of the two areas. Kinematically, the intersection of three main joint sets tends to detach blocks (sometimes in high volumes) from the cliffs. The A-DInSAR analysis demonstrated the presence of a landslide failure along the northwest side of the Monte San Martino town. The buildings in proximity to the cliffs did not show evidence of movements. More generally, this research gives insights into the pro and cons of different survey and analysis approaches and into the benefits of their procedural integration in space and in time. Overall, the procedure developed here may be applied in similar contexts in order to understand the structural features driving slopes' instabilities and create digital databases of geological/monitoring data. [ABSTRACT FROM AUTHOR]

The Frinco Castle (AT-Italy) was the focus of a critical requalification and restoration project and historical knowledge. The initial medieval nucleus was modified and enriched by other architectural parts giving the current shape over the centuries. These additions gave the castle its actual internal and external complexity and an extreme structural fragility: in 2014, a significant portion collapsed. The main objective of this work was to obtain 3D metric documentation and a historical interpretation of the castle for reconstruction and fruition purposes. The local administration has planned knowledge processes from 2021: an integrated 3D geodetic survey of the entire castle and stratigraphic investigations of masonries. Both surveys were essential for understanding the architectural composition as well as the historical evolution of the court. NURBS modelling and a stratigraphic analysis of masonries allowed for the implementation of 3D immersion related to the historical interpretation. Furthermore, this modelling choice was essential for virtually reconstructing the collapsed area and helping the restoration phase. [ABSTRACT FROM AUTHOR]