Search

Low energy surface coatings have found wide range of applications for generating hydrophobic and superhydrophobic surfaces. Most of the studies have been related to use of a single coating material over a single substrate or using a single technique. The degree of hydrophobicity is highly dependent on fabrication processes as well as materials being coated and as such warrants a high-level study using experimental optimization leading to the evaluation of the parametric behavior of coatings and their application techniques. Also, a single platform or system which can predict the required set of parameters for generating hydrophobic surface of required nature for given substrate is of requirement. This work applies the powerful machine learning algorithms (Levenberg Marquardt using Gauss Newton and Gradient methods) to evaluate the various processes affecting the anti-wetting behavior of coated printable paper substrates with the capability to predict the most optimized method of coating and materials that may lead to a desirable surface contact angle. The major application techniques used for this study pertain to dip coating, spray coating, spin coating and inkjet printing and silane and sol–gel base coating materials. [ABSTRACT FROM AUTHOR]

This study investigates the impact of air pollution on health outcomes in Middle Eastern countries, a region facing severe environmental challenges. As such, these are important in an effort to add up to policy-level as well as interventional changes that can be put in practice in the area of public health. Numeration analysis and association with health parameters was carried out by using Analytical tools such as, AIR Data, ARIMA,ANN, SVM and Exponential smoothing. Amongst the models, Support Vector Machine came again on top, with high accuracy yielding Mean Absolute Percentage Error of approximately 1%. Mortality of Air pollution in Qat from the case of Mortality of Air Pollution in Qatar is 959 while Auto regressive Integrated Moving average is 11.096, Exponential Smoothing 9.892 and Artificial Neural Networks are the source of inspiration for the development of this paper 4.61. The above perceptions indicate that there is need to adapt modeling strategies depending on the context and establish that it is possible to implement ML models in public health planning basket. This paper publishes the methodological frameworks for the purpose of modeling and analysis of the EHDs and serves as policy prescription for the policy makers to intending to reduce the effects of air borne pollution on health. [ABSTRACT FROM AUTHOR]

Acute appendicitis is a typical surgical emergency worldwide and one of the common causes of surgical acute abdomen in the elderly. Accurately diagnosing and differentiating acute appendicitis can assist clinicians in formulating a scientific and reasonable treatment plan and providing high-quality medical services for the elderly. In this study, we validated and analyzed the different performances of various machine learning models based on the analysis of clinical data, so as to construct a simple, fast, and accurate estimation method for the diagnosis of early acute appendicitis. The dataset of this paper was obtained from the medical data of elderly patients with acute appendicitis attending the First Affiliated Hospital of Anhui University of Chinese Medicine from January 2012 to January 2022, including 196 males (60.87%) and 126 females (39.13%), including 103 (31.99%) patients with complicated appendicitis and 219 (68.01%) patients with uncomplicated appendicitis. By comparing and analyzing the prediction results of the models implemented by nine different machine learning techniques (LR, CART, RF, SVM, Bayes, KNN, NN, FDA, and GBM), we found that the GBM algorithm gave the optimal results and that sensitivity, specificity, PPV, NPV, precision, recall, F1 and brier are 0.9167, 0.9739, 0.9429, 0.9613, 0.9429, 0.9167, 0.9296, and 0.05649, respectively. The GBM model prediction results are interpreted using the SHAP technology framework. Calibration and Decision curve analysis also show that the machine learning model proposed in this paper has some clinical and economic benefits. Finally, we developed the Shiny application for complicated appendicitis diagnosis to assist clinicians in quickly and effectively recognizing patients with complicated appendicitis (CA) and uncomplicated appendicitis (UA), and to formulate a more reasonable and scientific clinical plan for acute appendicitis patient population promptly. [ABSTRACT FROM AUTHOR]

In recent times, video inpainting techniques have intended to fill the missing areas or gaps in a video by utilizing known pixels. The variety in brightness or difference of the patches causes the state-of-the-art video inpainting techniques to exhibit high computation complexity and create seams in the target areas. To resolve these issues, this paper introduces a novel video inpainting technique that employs the Morphological Haar Wavelet Transform combined with the Krill Herd based Criminisi algorithm (MHWT-KHCA) to address the challenges of high computational demand and visible seam artifacts in current inpainting practices. The proposed MHWT-KHCA algorithm strategically reduces computation times and enhances the seamlessness of the inpainting process in videos. Through a series of experiments, the technique is validated against standard metrics such as peak signal-to-noise ratio (PSNR) and structural similarity index (SSIM), where it demonstrates superior performance compared to existing methods. Additionally, the paper outlines potential real-world applications ranging from video restoration to real-time surveillance enhancement, highlighting the technique's versatility and effectiveness. Future research directions include optimizing the algorithm for diverse video formats and integrating machine learning models to advance its capabilities further. [ABSTRACT FROM AUTHOR]

To deal with the highly nonlinear and time-varying characteristics of Batch Process, a model named adaptive stacking approximate kernel based broad learning system is proposed in this paper. This model innovatively introduces the approximate kernel based broad learning system (AKBLS) algorithm and the Adaptive Stacking framework, giving it strong nonlinear fitting ability, excellent generalization ability, and adaptive ability. The Broad Learning System (BLS) is known for its shorter training time for effective nonlinear processing, but the uncertainty brought by its double random mapping results in poor resistance to noisy data and unpredictable impact on performance. To address this issue, this paper proposes an AKBLS algorithm that reduces uncertainty, eliminates redundant features, and improves prediction accuracy by projecting feature nodes into the kernel space. It also significantly reduces the computation time of the kernel matrix by searching for approximate kernels to enhance its ability in industrial online applications. Extensive comparative experiments on various public datasets of different sizes validate this. The Adaptive Stacking framework utilizes the Stacking ensemble learning method, which integrates predictions from multiple AKBLS models using a meta-learner to improve generalization. Additionally, by employing the moving window method—where a fixed-length window slides through the database over time—the model gains adaptive ability, allowing it to better respond to gradual changes in industrial Batch Process. Experiments on a substantial dataset of penicillin simulations demonstrate that the proposed model significantly improves predictive accuracy compared to other common algorithms. [ABSTRACT FROM AUTHOR]

As a research hot topic in the field of network security, the implementation of machine learning, such as federated learning, involves information interactions among a large number of distributed network devices. If we regard these distributed network devices and connection relationships as a complex network, we can identify the influential nodes to find the crucial points for optimizing the imbalance of the reliability of devices in federated learning system. This paper will analyze the advantages and disadvantages of existing algorithms for identifying influential nodes in complex networks, and propose a method from the perspective of information dissemination for finding influential nodes based on Kullback–Leibler divergence model within the neighborhood (KLN). Firstly, the KLN algorithm removes a node to simulate the scenario of node failure in the information dissemination process. Secondly, KLN evaluates the loss of information entropy within the neighborhood after node removal by establishing the KL divergence model. Finally, it assesses the damage influence of the removed node by integrating the network attributes and KL divergence model, thus achieving the evaluation of node importance. To validate the performance of KLN, this paper conducts an analysis and comparison of its results with those of 11 other algorithms on 10 networks, using SIR model as a reference. Additionally, a case study was undertaken on a real epidemic propagation network, leading to the proposal of management and control strategies for daily protection based on the influential nodes. The experimental results indicate that KLN effectively evaluates the importance of the removed node using KL model within the neighborhood, and demonstrate better accuracy and applicability across networks of different scales. [ABSTRACT FROM AUTHOR]

A Virtual Power Plant (VPP) is a centralized energy system that manages, and coordinates distributed energy resources, integrating them into a unified entity. While the physical assets may be dispersed across various locations, the VPP integrates them into a virtual unified entity capable of responding to grid demands and market signals. This paper presents a tri-level hierarchical coordinated operational framework of VPP. Firstly, an Improved Pelican Optimization Algorithm (IPOA) is introduced to optimally schedule Distributed Energy Resources (DERs) within the VPP, resulting in a significant reduction in generation costs. Comparative analysis against conventional algorithms such as Genetic Algorithm (GA) and Particle Swarm Optimization (PSO) demonstrates IPOA's superior performance, achieving an average reduction of 8.5% in generation costs across various case studies. The second stage focuses on securing the optimized generation data from rising cyber threats, employing the capabilities of machine learning, preferably, a convolutional autoencoder to learn the normal patterns of the optimized data to detect deviations from the optimized generation data to prevent suboptimal decisions. The model exhibits exceptional performance in detecting manipulated data, with a False Positive Rate (FPR) of 1.92% and a Detection Accuracy (DA) of 98.06%, outperforming traditional detection techniques. Lastly, the paper delves into the dynamic nature of the day ahead market that the VPP participates in. In responding to the grid by selling its optimized generated power via the day-ahead market, the VPP employs the Prophet model, another machine learning technique to forecast the spot market price for the day-ahead to mitigate the adverse effects of price volatility. By utilizing Prophet forecasts, the VPP achieves an average revenue increase of 15.3% compared to scenarios without price prediction, emphasizing the critical role of predictive analytics in optimizing economic gains. This tri-level coordinated approach adopted addresses key challenges in the energy sector, facilitating progress towards achieving universal access to clean and affordable energy. [ABSTRACT FROM AUTHOR]

To deal with the highly nonlinear and time-varying characteristics of Batch Process, a model named adaptive stacking approximate kernel based broad learning system is proposed in this paper. This model innovatively introduces the approximate kernel based broad learning system (AKBLS) algorithm and the Adaptive Stacking framework, giving it strong nonlinear fitting ability, excellent generalization ability, and adaptive ability. The Broad Learning System (BLS) is known for its shorter training time for effective nonlinear processing, but the uncertainty brought by its double random mapping results in poor resistance to noisy data and unpredictable impact on performance. To address this issue, this paper proposes an AKBLS algorithm that reduces uncertainty, eliminates redundant features, and improves prediction accuracy by projecting feature nodes into the kernel space. It also significantly reduces the computation time of the kernel matrix by searching for approximate kernels to enhance its ability in industrial online applications. Extensive comparative experiments on various public datasets of different sizes validate this. The Adaptive Stacking framework utilizes the Stacking ensemble learning method, which integrates predictions from multiple AKBLS models using a meta-learner to improve generalization. Additionally, by employing the moving window method—where a fixed-length window slides through the database over time—the model gains adaptive ability, allowing it to better respond to gradual changes in industrial Batch Process. Experiments on a substantial dataset of penicillin simulations demonstrate that the proposed model significantly improves predictive accuracy compared to other common algorithms. [ABSTRACT FROM AUTHOR]

Supercritical fluids (SCFs) can be used to prepare drugs nanoparticles with improved solubility. SCFs have shown superior advantages in pharmaceutical industry as an environmentally friendly alternative to toxic/harmful organic solvents. They possess gas-like transport characteristics and liquid-like solvation power for solutes. Evaluation of chemotherapeutic drugs’ solubility in supercritical carbon dioxide (SCCO2) has been recently an attractive subject for developing this method in pharmaceutical sector. To reach this purpose, the utilization of accurate models is of great necessity to estimate experimental-based solubility data. In this paper, the authors tried to employ machine learning (ML) approaches to estimate the solubility of Letrozole (LET) drug as chemotherapeutic agent and correlate its values in wide ranges of temperature and pressure. To do this, PAR (Passive Aggressive Regression), RF (Random Forest), and RBF-SVM are the models used (Support Vector Machine with RBF kernel). These models optimized in terms of their hyper-parameters using GA algorithm. The optimized PAR, RF, RBF-SVM models obtained coefficients of determination (R-squared) of 0.8277, 0.9534, and 0.9947. Also, the MSE error rate of the models are 0.1342, 0.0305, and 0.0045, in the same order. The final result of the evaluations shows the optimized RBF-SVM model as the most appropriate model in this research. The model exhibits a maximum prediction error of 0.1289. [ABSTRACT FROM AUTHOR]

Liver ultrasound is widely used in clinical practice due to its advantages of non-invasiveness, non-radiation, and real-time imaging. Accurate segmentation of the liver region in ultrasound images is essential for accelerating the auxiliary diagnosis of liver-related diseases. This paper proposes BACANet, a deep learning algorithm designed for real-time liver ultrasound segmentation. Our approach utilizes a lightweight network backbone for liver feature extraction and incorporates a convolutional attention mechanism to enhance the network's ability to capture global contextual information. To improve early localization of liver boundaries, we developed a selective large kernel convolution module for boundary feature extraction and introduced explicit liver boundary supervision. Additionally, we designed an enhanced attention gate to efficiently convey liver body and boundary features to the decoder to enhance the feature representation capability. Experimental results across multiple datasets demonstrate that BACANet effectively completes the task of liver ultrasound segmentation, achieving a balance between inference speed and segmentation accuracy. On a public dataset, BACANet achieved a DSC of 0.921 and an IOU of 0.854. On a private test dataset, BACANet achieved a DSC of 0.950 and an IOU of 0.907, with an inference time of approximately 0.32 s per image on a CPU processor. [ABSTRACT FROM AUTHOR]

In this paper, a new method is designed to effectively determine the parameters of proton exchange membrane fuel cells (PEMFCs), i.e., ξ 1 , ξ 2 , ξ 3 , ξ 4 , R C , λ , and b . The fuel cells (FCs) involve multiple variable quantities with complex non-linear behaviours, demanding accurate modelling to ensure optimal operation. An accurate model of these FCs is essential to evaluate their performance accurately. Furthermore, the design of the FCs significantly impacts simulation studies, which are crucial for various technological applications. This study proposed an improved parameter estimation procedure for PEMFCs by using the GOOSE algorithm, which was inspired by the adaptive behaviours found in geese during their relaxing and foraging times. The orthogonal learning mechanism improves the performance of the original GOOSE algorithm. This FC model uses the root mean squared error as the objective function for optimizing the unknown parameters. In order to validate the proposed algorithm, a number of experiments using various datasets were conducted and compared the outcomes with different state-of-the-art algorithms. The outcomes indicate that the proposed GOOSE algorithm not only produced promising results but also exhibited superior performance in comparison to other similar algorithms. This approach demonstrates the ability of the GOOSE algorithm to simulate complex systems and enhances the robustness and adaptability of the simulation tool by integrating essential behaviours into the computational framework. The proposed strategy facilitates the development of more accurate and effective advancements in the utilization of FCs. [ABSTRACT FROM AUTHOR]

RNA modifications play an important role in actively controlling recently created formation in cellular regulation mechanisms, which link them to gene expression and protein. The RNA modifications have numerous alterations, presenting broad glimpses of RNA's operations and character. The modification process by the TET enzyme oxidation is the crucial change associated with cytosine hydroxymethylation. The effect of CR is an alteration in specific biochemical ways of the organism, such as gene expression and epigenetic alterations. Traditional laboratory systems that identify 5-hydroxymethylcytosine (5hmC) samples are expensive and time-consuming compared to other methods. To address this challenge, the paper proposed XGB5hmC, a machine learning algorithm based on a robust gradient boosting algorithm (XGBoost), with different residue based formulation methods to identify 5hmC samples. Their results were amalgamated, and six different frequency residue based encoding features were fused to form a hybrid vector in order to enhance model discrimination capabilities. In addition, the proposed model incorporates SHAP (Shapley Additive Explanations) based feature selection to demonstrate model interpretability by highlighting the high contributory features. Among the applied machine learning algorithms, the XGBoost ensemble model using the tenfold cross-validation test achieved improved results than existing state-of-the-art models. Our model reported an accuracy of 89.97%, sensitivity of 87.78%, specificity of 94.45%, F1-score of 0.8934%, and MCC of 0.8764%. This study highlights the potential to provide valuable insights for enhancing medical assessment and treatment protocols, representing a significant advancement in RNA modification analysis. [ABSTRACT FROM AUTHOR]

Real-time location tracking is essential for personal security in industrial scenes, e.g. monitoring worker safety in power substations. Ultra wideband (UWB) technology is suitable for indoor positioning thanks to its high penetration capability, high ranging accuracy and low power consumption. However, UWB based trilateration positioning requires high workload for field deployment of base stations. Indoor complex topology results in multipath and non-line of sight (NLOS) conditions of UWB signals, and degrades the positioning performance in terms of accuracy and reliability. This paper proposes a three-dimensional (3D) area recognition solution by integrating UWB time of flight (TOF) ranging and barometer measurements. The proposed solution utilizes a multi-tier distributed joint probabilistic inference model, which accomplishes the indoor 3D area recognition exploiting multiple clustering and prediction algorithms of machine learning. The field experiments showed that the proposed method can achieve an accuracy of 3D area recognition of more than 99.2%. The proposed method improves the computing efficiency by 93%. The errors of improved differential barometric height estimation method are less than 1 m, which means a success rate of 100% for floor identification, given a floor separation of 3–4 m. The proposed solution is suitable for personnel security applications of industrial scenes, which requires reliable real-time area information rather than just coordinates. [ABSTRACT FROM AUTHOR]

To address the problems of low accuracy in fault diagnosis of oil-immersed transformers, poor state perception ability and real-time collaboration during diagnosis feedback, a fault diagnosis method for transformers based on the integration of digital twins is proposed. Firstly, fault sample balance is achieved through Iterative Nearest Neighbor Oversampling (INNOS), Secondly, nine-dimensional ratio features are extracted, and the correlation between dissolved gases in oil and fault types is established. Then, sparse principal component analysis (SPCA) is used for feature fusion and dimensionality reduction. Finally, the Aquila Optimizer (AO) is introduced to optimize the parameters of the Kernel Extreme Learning Machine (KELM), establishing the optimal AO-KELM diagnosis model. The final fault diagnosis accuracy reaches 98.1013%. Combining transformer digital twin models, real-time interaction mapping between physical entities and virtual space is achieved, enabling online diagnosis of transformer faults. Experimental results show that the method proposed in this paper has high diagnostic accuracy and strong stability, providing reference for the intelligent operation and maintenance of transformers. [ABSTRACT FROM AUTHOR]

The classification of network traffic has become increasingly crucial due to the rapid growth in the number of internet users. Conventional approaches, such as identifying traffic based on port numbers and payload inspection are becoming ineffective due to the dynamic and encrypted nature of modern network traffic. A number of researchers have implemented Software Defined Networking (SDN) based traffic classification using Machine Learning (ML) and Deep Learning (DL) models. However, the studies had various limitations such as encrypted traffic detection, payload inspection, poor detection accuracy, and challenges with testing models both in offline and real-time traffic modes. ML models together with SDN are adopted nowadays to enhance classification performance. In this paper, both supervised (Logistic Regression, Decision Tree, Random Forest, AdaBoost, and Support Vector Machine) and unsupervised (K-means clustering) ML models were used to classify Domain Name System (DNS), Telnet, Ping, and Voice traffic flows simulated using the Distributed Internet Traffic Generator (D-ITG) tool. The use of this tool effectively manages and classifies traffic types based on their application. The study discussed the dataset used, model selection, implementation of the model, and implementation techniques (such as pre-processing, feature extraction, ML algorithm, and model evaluation metrics). The proposed model in SDN was implemented in Mininet for designing the network architecture and generating network traffic. Anaconda Python environment was utilized for traffic classification using various ML techniques. Among the models tested, the Decision Tree supervised learning achieved the highest accuracy of 99.81%, outperforming other supervised and unsupervised learning algorithms. These results indicate that the integration of ML with SDN provides an efficient classification method for identifying and accurately classifying both offline and real-time network traffic, enhanced quality of service (QoS), detection of encrypted packets, deep packet inspection and management. [ABSTRACT FROM AUTHOR]

This paper addresses a relevant problem in Forensic Sciences by integrating radiological techniques with advanced machine learning methodologies to create a non-invasive, efficient, and less examiner-dependent approach to age estimation. Our study includes a new dataset of 12,827 dental panoramic X-ray images representing the Brazilian population, covering an age range from 2.25 to 96.50 years. To analyze these exams, we employed a model adapted from InceptionV4, enhanced with data augmentation techniques. The proposed approach achieved robust and reliable results, with a Test Mean Absolute Error of 3.1 years and an R-squared value of 95.5%. Professional radiologists have validated that our model focuses on critical features for age assessment used in odontology, such as pulp chamber dimensions and stages of permanent teeth calcification. Importantly, the model also relies on anatomical information from the mandible, maxillary sinus, and vertebrae, which enables it to perform well even in edentulous cases. This study demonstrates the significant potential of machine learning to revolutionize age estimation in Forensic Science, offering a more accurate, efficient, and universally applicable solution. [ABSTRACT FROM AUTHOR]

Autoencoders are dimension reduction models in the field of machine learning which can be thought of as a neural network counterpart of principal components analysis (PCA). Due to their flexibility and good performance, autoencoders have been recently used for estimating nonlinear factor models in finance. The main weakness of autoencoders is that the results are less explainable than those obtained with the PCA. In this paper, we propose the adoption of the Shapley value to improve the explainability of autoencoders in the context of nonlinear factor models. In particular, we measure the relevance of nonlinear latent factors using a forecast-based Shapley value approach that measures each latent factor's contributions in determining the out-of-sample accuracy in factor-augmented models. Considering the interesting empirical instance of the commodity market, we identify the most relevant latent factors for each commodity based on their out-of-sample forecasting ability. [ABSTRACT FROM AUTHOR]

The incorporation of conformal cooling systems has significantly enhanced the efficiency and quality of injection molding process. While several automated methods have been developed for creating conformal cooling channels in injection molds, the current optimization process for conformal cooling design parameters is hindered by labor-intensive iterative thermal simulation processes and the substantial reliance on empirical human knowledge. This paper presents an innovative machine learning method to assess the thermal performance of conformal cooling systems by employing a combination of a non-linear regression model and a neural network. By employing a logarithmic regression model describing the temperature graph and a neural network predicting the coefficients of the logarithmic regression model, the thermal performance of specified conformal cooling systems can be assessed and predicted precisely. This methodology empowers designers to evaluate the thermal efficiency of conformal cooling systems efficiently and effectively to further optimize the conformal cooling design parameters without relying on tedious manual thermal and fluid simulation processes. [ABSTRACT FROM AUTHOR]

Advances in sensor, computing, and communication technologies are enabling big data analytics by providing time series data. However, conventional models struggle to identify sequence features and forecast accuracy. This paper investigates time series features and shows that some machine learning algorithms can outperform deep learning models. In particular, the problem analyzed concerned predicting the number of vehicles passing through an Italian tollbooth in 2021. The dataset, composed of 8766 rows and 6 columns relating to additional tollbooths, proved to have high stationarity and was treated through machine learning methods such as support vector machine, random forest, and eXtreme gradient boosting (XGBoost), as well as deep learning through recurrent neural networks with long short-term memory (RNN-LSTM) cells. From the comparison of these models, the prediction through the XGBoost algorithm outperforms competing algorithms, particularly in terms of MAE and MSE. The result highlights how a shallower algorithm than a neural network is, in this case, able to obtain a better adaptation to the time series instead of a much deeper model that tends to develop a smoother prediction. [ABSTRACT FROM AUTHOR]

The growing integration of renewable energy sources into grid-connected microgrids has created new challenges in power generation forecasting and energy management. This paper explores the use of advanced machine learning algorithms, specifically Support Vector Regression (SVR), to enhance the efficiency and reliability of these systems. The proposed SVR algorithm leverages comprehensive historical energy production data, detailed weather patterns, and dynamic grid conditions to accurately forecast power generation. Our model demonstrated significantly lower error metrics compared to traditional linear regression models, achieving a Mean Squared Error of 2.002 for solar PV and 3.059 for wind power forecasting. The Mean Absolute Error was reduced to 0.547 for solar PV and 0.825 for wind scenarios, and the Root Mean Squared Error (RMSE) was 1.415 for solar PV and 1.749 for wind power, showcasing the model's superior accuracy. Enhanced predictive accuracy directly contributes to optimized resource allocation, enabling more precise control of energy generation schedules and reducing the reliance on external power sources. The application of our SVR model resulted in an 8.4% reduction in overall operating costs, highlighting its effectiveness in improving energy management efficiency. Furthermore, the system's ability to predict fluctuations in energy output allowed for adaptive real-time energy management, reducing grid stress and enhancing system stability. This approach led to a 10% improvement in the balance between supply and demand, a 15% reduction in peak load demand, and a 12% increase in the utilization of renewable energy sources. Our approach enhances grid stability by better balancing supply and demand, mitigating the variability and intermittency of renewable energy sources. These advancements promote a more sustainable integration of renewable energy into the microgrid, contributing to a cleaner, more resilient, and efficient energy infrastructure. The findings of this research provide valuable insights into the development of intelligent energy systems capable of adapting to changing conditions, paving the way for future innovations in energy management. Additionally, this work underscores the potential of machine learning to revolutionize energy management practices by providing more accurate, reliable, and cost-effective solutions for integrating renewable energy into existing grid infrastructures. [ABSTRACT FROM AUTHOR]

Federated Learning is an effective solution to address the issues of data isolation and privacy leakage in machine learning. However, ensuring the security of network devices and architectures deploying federated learning remains a challenge due to network attacks. This paper proposes an attention-based Graph Neural Network for detecting cross-level and cross-department network attacks. This method enables collaborative model training while protecting data privacy on distributed devices. By organizing network traffic information in chronological order and constructing a graph structure based on log density, enhances the accuracy of network attack detection. The introduction of an attention mechanism and the construction of a Federated Graph Attention Network (FedGAT) model are used to evaluate the interactivity between nodes in the graph, thereby improving the precision of internal network interactions. Experimental results demonstrate that our method achieves comparable accuracy and robustness to traditional detection methods while prioritizing privacy protection and data security. [ABSTRACT FROM AUTHOR]

Independent component analysis (ICA) and dictionary learning (DL) are the most successful blind source separation (BSS) methods for functional magnetic resonance imaging (fMRI) data analysis. However, ICA to higher and DL to lower extent may suffer from performance degradation by the presence of anomalous observations in the recovered time courses (TCs) and high overlaps among spatial maps (SMs). This paper addressed both problems using a novel three-layered sparse DL (TLSDL) algorithm that incorporated prior information in the dictionary update process and recovered full-rank outlier-free TCs from highly corrupted measurements. The associated sequential DL model involved factorizing each subject's data into a multi-subject (MS) dictionary and MS sparse code while imposing a low-rank and a sparse matrix decomposition restriction on the dictionary matrix. It is derived by solving three layers of feature extraction and component estimation. The first and second layers captured brain regions with low and moderate spatial overlaps, respectively. The third layer that segregated regions with significant spatial overlaps solved a sequence of vector decomposition problems using the proximal alternating linearized minimization (PALM) method and solved a decomposition restriction using the alternating directions method (ALM). It learned outlier-free dynamics that integrate spatiotemporal diversities across brains and external information. It differs from existing DL methods owing to its unique optimization model, which incorporates prior knowledge, subject-wise/multi-subject representation matrices, and outlier handling. The TLSDL algorithm was compared with existing dictionary learning algorithms using experimental and synthetic fMRI datasets to verify its performance. Overall, the mean correlation value was found to be 26 % higher for the TLSDL than for the state-of-the-art subject-wise sequential DL (swsDL) technique. [ABSTRACT FROM AUTHOR]

Air quality is a fundamental component of a healthy environment for human beings. Monitoring networks for air pollution have been established in numerous industrial zones. The data collected by the pervasive monitoring devices can be utilized not only for determining the current environmental condition, but also for forecasting it in the near future. This paper considers the applications of different machine learning methods for the prediction of the two most widely used quantities. Particulate matter (PM) with a diameter of 2.5 and 10 µm, respectively. The data are collected via a proprietary monitoring station, designated as the Ecolumn. The Ecolumn monitors a number of key parameters, including temperature, pressure, humidity, PM 1.0, PM 2.5, and PM 10, in a timely manner. The data were employed in the development of multiple models based on selected machine learning methods. The decision tree, random forest, recurrent neural network, and long short-term memory models were employed. Experiments were conducted with varying hyperparameters and network architectures. Different time scales (10 min, 1 h, and 24 h) were examined. The most optimal results were observed for the Long Short-Term Memory algorithm when utilizing the shortest available time spans (shortest averaging times). The decision tree and random forest algorithms demonstrated unexpectedly high performance for long averaging times, exhibiting only a slight decline in accuracy compared to neural networks for shorter averaging times. Recommendations for the potential applicability of the tested methods were formulated. [ABSTRACT FROM AUTHOR]

This paper presents an analysis of trunk movement in women with postnatal low back pain using machine learning techniques. The study aims to identify the most important features related to low back pain and to develop accurate models for predicting low back pain. Machine learning approaches showed promise for analyzing biomechanical factors related to postnatal low back pain (LBP). This study applied regression and classification algorithms to the trunk movement proposed dataset from 100 postpartum women, 50 with LBP and 50 without. The Optimized optuna Regressor achieved the best regression performance with a mean squared error (MSE) of 0.000273, mean absolute error (MAE) of 0.0039, and R2 score of 0.9968. In classification, the Basic CNN and Random Forest Classifier both attained near-perfect accuracy of 1.0, the area under the receiver operating characteristic curve (AUC) of 1.0, precision of 1.0, recall of 1.0, and F1-score of 1.0, outperforming other models. Key predictive features included pain (correlation of -0.732 with flexion range of motion), range of motion measures (flexion and extension correlation of 0.662), and average movements (correlation of 0.957 with flexion). Feature selection consistently identified pain, flexion, extension, lateral flexion, and average movement as influential across methods. While limited to this initial dataset and constrained by generalizability, machine learning offered quantitative insight. Models accurately regressed (MSE < 0.01, R2 > 0.95) and classified (accuracy > 0.94) trunk biomechanics distinguishing LBP. Incorporating additional demographic, clinical, and patient-reported factors may enhance individualized risk prediction and treatment personalization. This preliminary application of advanced analytics supported machine learning's potential utility for both LBP risk determination and outcome improvement. This study provides valuable insights into the use of machine learning techniques for analyzing trunk movement in women with postnatal low back pain and can potentially inform the development of more effective treatments. Trial registration: The trial was designed as an observational and cross-section study. The study was approved by the Ethical Committee in Deraya University, Faculty of Pharmacy, (No: 10/2023). According to the ethical standards of the Declaration of Helsinki. This study complies with the principles of human research. Each patient signed a written consent form after being given a thorough description of the trial. The study was conducted at the outpatient clinic from February 2023 till June 30, 2023. [ABSTRACT FROM AUTHOR]

Tensor networks are emerging architectures for implementing quantum classification models. The branching multi-scale entanglement renormalization ansatz (BMERA) is a tensor network known for its enhanced entanglement properties. This paper introduces a hybrid quantum-classical classification model based on BMERA and explores the correlation between circuit layout, expressiveness, and classification accuracy. Additionally, we present an autodifferentiation method for computing the cost function gradient, which serves as a viable option for other hybrid quantum-classical models. Through numerical experiments, we demonstrate the accuracy and robustness of our classification model in tasks such as image recognition and cluster excitation discrimination, offering a novel approach for designing quantum classification models. [ABSTRACT FROM AUTHOR]

Terahertz (THz) wireless communication is a promising technology that will enable ultra-high data rates, and very low latency for future wireless communications. Intelligent Reconfigurable Surfaces (IRS) aiding Unmanned Aerial Vehicle (UAV) are two essential technologies that play a pivotal role in balancing the demands of Sixth-Generation (6G) wireless networks. In practical scenarios, mission completion time and energy consumption serve as crucial benchmarks for assessing the efficiency of UAV-IRS enabled THz communication. Achieving swift mission completion requires UAV-IRS to fly at maximum speed above the ground users it serves. However, this results in higher energy consumption. To address the challenge, this paper studies UAV-IRS trajectory planning problems in THz networks. The problem is formulated as an optimization problem aiming to minimize UAVs-IRS mission completion time by optimizing the UAV-IRS trajectory, considering the energy consumption constraint for UAVs-IRS. The proposed optimization algorithm, with low complexity, is well-suited for applications in THz communication networks. This problem is a non-convex, optimization problem that is NP-hard and presents challenges for conventional optimization techniques. To overcome this, we proposed a Deep Q-Network (DQN) reinforcement learning algorithm to enhance performance. Simulation results show that our proposed algorithm achieves performance compared to benchmark schemes. [ABSTRACT FROM AUTHOR]

Due to the excessive growth of PM 2.5 in aerosol, the cases of lung cancer are increasing rapidly and are most severe among other types as the highest mortality rate. In most of the cases, lung cancer is detected with least symptoms at its later stage. Hence, clinical records may play a vital role to diagnose this disease at the correct stage for suitable medication to cure it. To detect lung cancer an accurate prediction method is needed which is significantly reliable. In the digital clinical record era with advancement in computing algorithms including machine learning techniques opens an opportunity to ease the process. Various machine learning algorithms may be applied over realistic clinical data but the predictive power is yet to be comprehended for accurate results. This paper envisages to compare twelve potential machine learning algorithms over clinical data with eleven symptoms of lung cancer along with two major habits of patients to predict a positive case accurately. The result has been found based on classification and heat map correlation. K-Nearest Neighbor Model and Bernoulli Naive Bayes Model are found most significant methods for early lung cancer prediction. [ABSTRACT FROM AUTHOR]

As artificial intelligence (AI) becomes widespread, there is increasing attention on investigating bias in machine learning (ML) models. Previous research concentrated on classification problems, with little emphasis on regression models. This paper presents an easy-to-apply and effective methodology for mitigating bias in bagging and boosting regression models, that is also applicable to any model trained through minimizing a differentiable loss function. Our methodology measures bias rigorously and extends the ML model's loss function with a regularization term to penalize high correlations between model errors and protected attributes. We applied our approach to three popular tree-based ensemble models: a random forest model (RF), a gradient-boosted model (GBT), and an extreme gradient boosting model (XGBoost). We implemented our methodology on a case study for predicting road-level traffic volume, where RF, GBT, and XGBoost models were shown to have high accuracy. Despite high accuracy, the ML models were shown to perform poorly on roads in minority-populated areas. Our bias mitigation approach reduced minority-related bias by over 50%. [ABSTRACT FROM AUTHOR]

Software-defined networks (SDNs) have been growing rapidly due to their ability to provide an efficient network management approach compared to traditional methods. However, one of the major challenges facing SDNs is the threat of Distributed Denial of Service (DDoS) attacks, which can severely impact network availability. Detecting and mitigating such attacks is challenging, given the constantly evolving range of attack techniques. In this paper, a novel hybrid approach is proposed that combines statistical methods with machine-learning capabilities to address the detection and mitigation of DDoS attacks in SDN environments. The statistical phase of the approach utilizes an entropy-based detection mechanism, while the machine-learning phase employs a clustering mechanism to analyze the impact of active users on the entropy of the system. The k-means algorithm is used for clustering. The proposed approach was experimentally evaluated using three modern datasets, namely, CIC-IDS2017, CSE-CIC-2018, and CICIDS2019. The results demonstrate the effectiveness of the system in detecting and blocking sudden and rapid attacks, highlighting the potential of the proposed approach to significantly enhance security against DDoS attacks in SDN environments. [ABSTRACT FROM AUTHOR]

Genetic and agronomic advances consistently lead to an annual increase in global barley yield. Since abiotic stresses (physical environmental factors that negatively affect plant growth) reduce barley yield, it is necessary to predict barley resistance. Artificial intelligence and machine learning (ML) models are new and powerful tools for predicting product resilience. Considering the research gap in the use of molecular markers in predicting abiotic stresses, this paper introduces a new approach called GenPhenML that combines molecular markers and phenotypic traits to predict the resistance of barley genotypes to drought and salinity stresses by ML models. GenPhenML uses feature selection algorithms to determine the most important molecular markers. It then identifies the best model that predicts atmospheric resistance with lower MAE, RMSE, and higher R2. The results showed that GenPhenML with a neural network model predicted the salinity stress resistance score with MAE, RMSE and R2 values of 0.1206, 0.0308 and 0.9995, respectively. Also, the NN model predicted drought stress scores with MAE, RMSE and R2 values of 0.0727, 0.0105 and 0.9999, respectively. The GenPhenML approach was also used to classify barley genotypes as resistant and stress-sensitive. The results showed that the accuracy, accuracy and F1 score of the proposed approach for salinity and drought stress classification were higher than 97%. [ABSTRACT FROM AUTHOR]

Gastric cancer remains a significant global health concern, with a notably high incidence in East Asia. This paper explores the potential of explainable machine learning models in enhancing the early diagnosis of gastric cancer. Through comprehensive evaluations, various machine learning models, including WeightedEnsemble, CatBoost, and RandomForest, demonstrated high potential in accurately diagnosing early gastric cancer. The study emphasizes the importance of model explainability in medical diagnostics, showing how transparent, explainable models can increase trust and clinical acceptance, thereby improving diagnostic accuracy and patient outcomes. This research not only highlights key biomarkers and clinical features critical for early detection but also presents a versatile approach that could be applied to other medical diagnostics, promoting broader adoption of machine learning in clinical settings. [ABSTRACT FROM AUTHOR]

In this work, we propose a novel single-end morphing capacitive sensing method for shape tracking, FxC, by combining Folding origami structures and Capacitive sensing to detect the morphing structural motions using state-of-the-art sensing circuits and deep learning. It was observed through embedding areas of origami structures with conductive materials as single-end capacitive sensing patches, that the sensor signals change coherently with the motion of the structure. Different from other origami capacitors where the origami structures are used in adjusting the thickness of the dielectric layer of double-plate capacitors, FxC uses only a single conductive plate per channel, and the origami structure directly changes the geometry of the conductive plate. We examined the operation principle of morphing single-end capacitors through 3D geometry simulation combined with physics theoretical deduction, which deduced similar behavior as observed in experimentation. Then a software pipeline was developed to use the sensor signals to reconstruct the dynamic structural geometry through data-driven deep neural network regression of geometric primitives extracted from vision tracking. We created multiple folding patterns to validate our approach, based on folding patterns including Accordion, Chevron, Sunray and V-Fold patterns with different layouts of capacitive sensors using paper-based and textile-based materials. Experimentation results show that the geometry primitives predicted from the capacitive signals have a strong correlation with the visual ground truth with R-squared value of up to 95% and tracking error of 6.5 mm for patches. The simulation and machine learning constitute two-way information exchange between the sensing signals and structural geometry. By embedding part of the origami surface with morphing single-end capacitive sensors, FxC presents a unique solution that leverages both the mechanical properties of origami and sensing properties of capacitive sensing. [ABSTRACT FROM AUTHOR]

Biofiltration is a method of pollution management that utilizes a bioreactor containing live material to absorb and destroy pollutants biologically. In this paper, we investigate mathematical models of biofiltration for mixing volatile organic compounds (VOCs) for instance hydrophilic (methanol) and hydrophobic (α -pinene). The system of nonlinear diffusion equations describes the Michaelis-Menten kinetics of the enzymic chemical reaction. These models represent the chemical oxidation in the gas phase and mass transmission within the air-biofilm junction. Furthermore, for the numerical study of the saturation of α -pinene and methanol in the biofilm and gas state, we have developed an efficient supervised machine learning algorithm based on the architecture of Elman neural networks (ENN). Moreover, the Levenberg-Marquardt (LM) optimization paradigm is used to find the parameters/ neurons involved in the ENN architecture. The approximation to a solutions found by the ENN-LM technique for methanol saturation and α -pinene under variations in different physical parameters are allegorized with the numerical results computed by state-of-the-art techniques. The graphical and statistical illustration of indications of performance relative to the terms of absolute errors, mean absolute deviations, computational complexity, and mean square error validates that our results perfectly describe the real-life situation and can further be used for problems arising in chemical engineering. [ABSTRACT FROM AUTHOR]

There is a complex high-dimensional nonlinear mapping relationship between the compressive strength of High-Performance Concrete (HPC) and its components, which has great influence on the accurate prediction of compressive strength. In this paper, an efficient robust software calculation strategy combining BP Neural Network (BPNN), Support Vector Machine (SVM) and Genetic Algorithm (GA) is proposed for the prediction of compressive strength of HPC. 8 features were extracted from the previous literature, and a compressive strength database containing 454 sets of data was constructed. The model was trained and tested, and the performance of 4 Machine Learning (ML) models, namely BPNN, SVM, GA-BPNN and GA-SVM, was compared. The results show that the coupled model is superior to the single model. Moreover, because GA-SVM has better generalization ability and theoretical basis, its convergence speed and prediction accuracy are better than GA-BPNN. Then Grey Relational Analysis (GRA) and Shapley analysis were used to verify the interpretability of the GA-SVM model, which showed that the water-binder ratio had the most significant influence on the compressive strength. Finally, the combination of multiple input variables to evaluate the compressive strength supplemented this research, and again verified the significant influence of water-binder ratio, providing reference value for subsequent research. [ABSTRACT FROM AUTHOR]

Freak or rogue waves are a danger to ships, offshore infrastructure, and other maritime equipment. Reliable rogue wave forecasts could mitigate this risk for operations at sea. While the occurrence of oceanic rogue waves at sea is generally acknowledged, reliable rogue wave forecasts are unavailable. In this paper, the authors seek to overcome this shortcoming by demonstrating how rogue waves can be predicted from field measurements. An extensive buoy data set consisting of billions of waves is utilized to parameterize neural networks. This network is trained to distinguish waves prior to an extreme wave from waves which are not followed by an extreme wave. With this approach, three out of four rogue waves are correctly predicted 1 min ahead of time. When the advance warning time is extended to 5 min, it is found that the ratio of accurate predictions is reduced to seven out of ten rogue waves. Another strength of the trained neural networks is their capabilities to extrapolate. This aspect is verified by obtaining forecasts for a buoy location that is not included in the networks' training set. Furthermore, the performance of the trained neural network carries over to realistic scenarios where rogue waves are extremely rare. [ABSTRACT FROM AUTHOR]

Accurately estimating Battery State of Charge (SOC) is essential for safe and optimal electric vehicle operation. This paper presents a comparative assessment of multiple machine learning regression algorithms including Support Vector Machine, Neural Network, Ensemble Method, and Gaussian Process Regression for modelling the complex relationship between real-time driving data and battery SOC. The models are trained and tested on extensive field data collected from diverse drivers across varying conditions. Statistical performance metrics evaluate the SOC prediction accuracy on the test set. Gaussian process regression demonstrates superior precision surpassing the other techniques with the lowest errors. Case studies analyse model competence in mimicking actual battery charge/discharge characteristics responding to changing drivers, temperatures, and drive cycles. The research provides a reliable data-driven framework leveraging advanced analytics for precise real-time SOC monitoring to enhance battery management. [ABSTRACT FROM AUTHOR]

Hepatitis C virus (HCV) is a major global health concern, affecting millions of individuals worldwide. While existing literature predominantly focuses on disease classification using clinical data, there exists a critical research gap concerning HCV genotyping based on genomic sequences. Accurate HCV genotyping is essential for patient management and treatment decisions. While the neural models excel at capturing complex patterns, they still face challenges, such as data scarcity, that exist a lot in computational genomics. To overcome this challenges, this paper introduces an advanced deep learning approach for HCV genotyping based on the graphical representation of nucleotide sequences that outperforms classical approaches. Notably, it is effective for both partial and complete HCV genomes and addresses challenges associated with imbalanced datasets. In this work, ten HCV genotypes: 1a, 1b, 2a, 2b, 2c, 3a, 3b, 4, 5, and 6 were used in the analysis. This study utilizes Chaos Game Representation for 2D mapping of genomic sequences, employing self-supervised learning using convolutional autoencoder for deep feature extraction, resulting in an outstanding performance for HCV genotyping compared to various machine learning and deep learning models. This baseline provides a benchmark against which the performance of the proposed approach and other models can be evaluated. The experimental results showcase a remarkable classification accuracy of over 99%, outperforming traditional deep learning models. This performance demonstrates the capability of the proposed model to accurately identify HCV genotypes in both partial and complete sequences and in dealing with data scarcity for certain genotypes. The results of the proposed model are compared to NCBI genotyping tool. [ABSTRACT FROM AUTHOR]

Early detection of the adenocarcinoma cancer in colon tissue by means of explainable deep learning, by classifying histological images and providing visual explainability on model prediction. Considering that in recent years, deep learning techniques have emerged as powerful techniques in medical image analysis, offering unprecedented accuracy and efficiency, in this paper we propose a method to automatically detect the presence of cancerous cells in colon tissue images. Various deep learning architectures are considered, with the aim of considering the best one in terms of quantitative and qualitative results. As a matter of fact, we consider qualitative results by taking into account the so-called prediction explainability, by providing a way to highlight on the tissue images the areas that from the model point of view are related to the presence of colon cancer. The experimental analysis, performed on 10,000 colon issue images, showed the effectiveness of the proposed method by obtaining an accuracy equal to 0.99. The experimental analysis shows that the proposed method can be successfully exploited for colon cancer detection and localisation from tissue images. [ABSTRACT FROM AUTHOR]

Historically, the analysis of stimulus-dependent time–frequency patterns has been the cornerstone of most electroencephalography (EEG) studies. The abnormal oscillations in high-frequency waves associated with psychotic disorders during sensory and cognitive tasks have been studied many times. However, any significant dissimilarity in the resting-state low-frequency bands is yet to be established. Spectral analysis of the alpha and delta band waves shows the effectiveness of stimulus-independent EEG in identifying the abnormal activity patterns of pathological brains. A generalized model incorporating multiple frequency bands should be more efficient in associating potential EEG biomarkers with first-episode psychosis (FEP), leading to an accurate diagnosis. We explore multiple machine-learning methods, including random-forest, support vector machine, and Gaussian process classifier (GPC), to demonstrate the practicality of resting-state power spectral density (PSD) to distinguish patients of FEP from healthy controls. A comprehensive discussion of our preprocessing methods for PSD analysis and a detailed comparison of different models are included in this paper. The GPC model outperforms the other models with a specificity of 95.78% to show that PSD can be used as an effective feature extraction technique for analyzing and classifying resting-state EEG signals of psychiatric disorders. [ABSTRACT FROM AUTHOR]

We present the first machine learning-based autonomous hyperspectral neutron computed tomography experiment performed at the Spallation Neutron Source. Hyperspectral neutron computed tomography allows the characterization of samples by enabling the reconstruction of crystallographic information and elemental/isotopic composition of objects relevant to materials science. High quality reconstructions using traditional algorithms such as the filtered back projection require a high signal-to-noise ratio across a wide wavelength range combined with a large number of projections. This results in scan times of several days to acquire hundreds of hyperspectral projections, during which end users have minimal feedback. To address these challenges, a golden ratio scanning protocol combined with model-based image reconstruction algorithms have been proposed. This novel approach enables high quality real-time reconstructions from streaming experimental data, thus providing feedback to users, while requiring fewer yet a fixed number of projections compared to the filtered back projection method. In this paper, we propose a novel machine learning criterion that can terminate a streaming neutron tomography scan once sufficient information is obtained based on the current set of measurements. Our decision criterion uses a quality score which combines a reference-free image quality metric computed using a pre-trained deep neural network with a metric that measures differences between consecutive reconstructions. The results show that our method can reduce the measurement time by approximately a factor of five compared to a baseline method based on filtered back projection for the samples we studied while automatically terminating the scans. [ABSTRACT FROM AUTHOR]

Programmed death-ligand 1 (PD-L1) expression is currently used in the clinic to assess eligibility for immune-checkpoint inhibitors via the tumor proportion score (TPS), but its efficacy is limited by high interobserver variability. Multiple papers have presented systems for the automatic quantification of TPS, but none report on the task of determining cell-level PD-L1 expression and often reserve their evaluation to a single PD-L1 monoclonal antibody or clinical center. In this paper, we report on a deep learning algorithm for detecting PD-L1 negative and positive tumor cells at a cellular level and evaluate it on a cell-level reference standard established by six readers on a multi-centric, multi PD-L1 assay dataset. This reference standard also provides for the first time a benchmark for computer vision algorithms. In addition, in line with other papers, we also evaluate our algorithm at slide-level by measuring the agreement between the algorithm and six pathologists on TPS quantification. We find a moderately low interobserver agreement at cell-level level (mean reader-reader F1 score = 0.68) which our algorithm sits slightly under (mean reader-AI F1 score = 0.55), especially for cases from the clinical center not included in the training set. Despite this, we find good AI-pathologist agreement on quantifying TPS compared to the interobserver agreement (mean reader-reader Cohen's kappa = 0.54, 95% CI 0.26–0.81, mean reader-AI kappa = 0.49, 95% CI 0.27—0.72). In conclusion, our deep learning algorithm demonstrates promise in detecting PD-L1 expression at a cellular level and exhibits favorable agreement with pathologists in quantifying the tumor proportion score (TPS). We publicly release our models for use via the Grand-Challenge platform. [ABSTRACT FROM AUTHOR]

The relentless pursuit of miniaturization and performance enhancement in electronic devices has led to a fundamental challenge in the field of circuit design and simulation-how to accurately account for the inherent stochastic nature of certain devices. While conventional deterministic models have served as indispensable tools for circuit designers, they fall short when it comes to capturing the subtle yet critical variability exhibited by many electronic components. In this paper, we present an innovative approach that transcends the limitations of traditional modeling techniques by harnessing the power of machine learning, specifically Mixture Density Networks (MDNs), to faithfully represent and simulate the stochastic behavior of electronic devices. We demonstrate our approach to model heater cryotrons, where the model is able to capture the stochastic switching dynamics observed in the experiment. Our model shows 0.82% mean absolute error for switching probability. This paper marks a significant step forward in the quest for accurate and versatile compact models, poised to drive innovation in the realm of electronic circuits. [ABSTRACT FROM AUTHOR]

This paper presents a cutting-edge Sustainable Power Management System for Light Electric Vehicles (LEVs) using a Hybrid Energy Storage Solution (HESS) integrated with Machine Learning (ML)-enhanced control. The system's central feature is its ability to harness renewable energy sources, such as Photovoltaic (PV) panels and supercapacitors, which overcome traditional battery-dependent constraints. The proposed control algorithm orchestrates power sharing among the battery, supercapacitor, and PV sources, optimizing the utilization of available renewable energy and ensuring stringent voltage regulation of the DC bus. Notably, the ML-based control ensures precise torque and speed regulation, resulting in significantly reduced torque ripple and transient response times. In practical terms, the system maintains the DC bus voltage within a mere 2.7% deviation from the nominal value under various operating conditions, a substantial improvement over existing systems. Furthermore, the supercapacitor excels at managing rapid variations in load power, while the battery adjusts smoothly to meet the demands. Simulation results confirm the system's robust performance. The HESS effectively maintains voltage stability, even under the most challenging conditions. Additionally, its torque response is exceptionally robust, with negligible steady-state torque ripple and fast transient response times. The system also handles speed reversal commands efficiently, a vital feature for real-world applications. By showcasing these capabilities, the paper lays the groundwork for a more sustainable and efficient future for LEVs, suggesting pathways for scalable and advanced electric mobility solutions. [ABSTRACT FROM AUTHOR]

When traditional EEG signals are collected based on the Nyquist theorem, long-time recordings of EEG signals will produce a large amount of data. At the same time, limited bandwidth, end-to-end delay, and memory space will bring great pressure on the effective transmission of data. The birth of compressed sensing alleviates this transmission pressure. However, using an iterative compressed sensing reconstruction algorithm for EEG signal reconstruction faces complex calculation problems and slow data processing speed, limiting the application of compressed sensing in EEG signal rapid monitoring systems. As such, this paper presents a non-iterative and fast algorithm for reconstructing EEG signals using compressed sensing and deep learning techniques. This algorithm uses the improved residual network model, extracts the feature information of the EEG signal by one-dimensional dilated convolution, directly learns the nonlinear mapping relationship between the measured value and the original signal, and can quickly and accurately reconstruct the EEG signal. The method proposed in this paper has been verified by simulation on the open BCI contest dataset. Overall, it is proved that the proposed method has higher reconstruction accuracy and faster reconstruction speed than the traditional CS reconstruction algorithm and the existing deep learning reconstruction algorithm. In addition, it can realize the rapid reconstruction of EEG signals. [ABSTRACT FROM AUTHOR]

This paper presents a data processing pipeline designed to extract information from the hyperspectral signature of unknown space objects. The methodology proposed in this paper determines the material composition of space objects from single pixel images. Two techniques are used for material identification and classification: one based on machine learning and the other based on a least square match with a library of known spectra. From this information, a supervised machine learning algorithm is used to classify the object into one of several categories based on the detection of materials on the object. The behaviour of the material classification methods is investigated under non-ideal circumstances, to determine the effect of weathered materials, and the behaviour when the training library is missing a material that is present in the object being observed. Finally the paper will present some preliminary results on the identification and classification of space objects. [ABSTRACT FROM AUTHOR]

This paper proposes an innovative global solution which is a pioneering work applying automated machine learning algorithms to remarkable precision sparse underwater direction-of-arrival (DOA) estimation that views the subaquatic sparse-sampling DOA estimation problem as a classification prediction task. The proposed solution, termed automated multi-layer perceptron discriminative neural network (AutoMPDNN), is built upon a Bayesian optimization framework. AutoMPDNN transforms sparsely sampled time-domain signals into the complex domain, preserving essential components in a one-source single-snapshot scenario. Leveraging Bayesian optimization principles, the algorithm embeds necessary hyperparameters into the loss function, effectively defining it as a maximum likelihood problem using the upper confidence bound function and incorporating sparse signal features. We also explore the model space architecture and introduce variants of AutoMPDNN, denoted as AutoMPDNNs_ln (n = 2,3,4). Through a series of plane wave simulation experiments, it is demonstrated that AutoMPDNN achieves the highest prediction performance for one-source single-snapshot scenarios compared to classical DOA estimation algorithms that incorporate sparse representation approaches, as well as contemporary deep learning DOA methods under varying conditions. [ABSTRACT FROM AUTHOR]

Laser powder bed fusion (LPBF) is an additive manufacturing technology with high practical value. In order to improve the quality of the fabricated parts, process monitoring has become a crucial solution, offering the potential to ensure manufacturing stability and repeatability. However, a cardinal challenge involves discerning a precise correlation between process characteristics and potential defects. This paper elucidates the integration of an off-axis vision monitoring mechanism via a high-speed camera focused on capturing the single-track melting phenomenon. An innovative image processing method was devised to segment the plume and spatters, while Kalman filter was employed for multi-object tracking of the spatters. The features of both the plume and spatters were extracted, and their relationship with molten states was investigated. Finally, the PSO-XGBoost algorithm was utilized to identify five molten states, achieving an accuracy of 92.16%. The novelty of this approach resides in its unique combination of plume characteristics, spatter features, and computationally efficient machine learning models, which collectively address the challenge of limited field of view prevalent in real production scenarios, thereby enhancing process monitoring efficacy. Relative to existing methodologies, the proposed PSO-XGBoost approach offers heightened accuracy, convenience, and appropriateness for the monitoring of the LPBF process. This work provides an effective and novel approach to monitor the LPBF process and evaluate the part fabrication quality for complex and changeable working conditions. [ABSTRACT FROM AUTHOR]

This research paper presents a comprehensive investigation into the utilization of color image processing technologies and deep learning algorithms in the development of a robot vision system specifically designed for 8-ball billiards. The sport of billiards, with its various games and ball arrangements, presents unique challenges for robotic vision systems. The proposed methodology addresses these challenges through two main components: object detection and ball pattern recognition. Initially, a robust algorithm is employed to detect the billiard balls using color space transformation and thresholding techniques. This is followed by determining the position of the billiard table through strategic cropping and isolation of the primary table area. The crucial phase involves the intricate task of recognizing ball patterns to differentiate between solid and striped balls. To achieve this, a modified convolutional neural network is utilized, leveraging the Xception network optimized by an innovative algorithm known as the Improved Chaos African Vulture Optimization (ICAVO) algorithm. The ICAVO algorithm enhances the Xception network's performance by efficiently exploring the solution space and avoiding local optima. The results of this study demonstrate a significant enhancement in recognition accuracy, with the Xception/ICAVO model achieving remarkable recognition rates for both solid and striped balls. This paves the way for the development of more sophisticated and efficient billiards robots. The implications of this research extend beyond 8-ball billiards, highlighting the potential for advanced robotic vision systems in various applications. The successful integration of color image processing, deep learning, and optimization algorithms shows the effectiveness of the proposed methodology. This research has far-reaching implications that go beyond just billiards. The cutting-edge robotic vision technology can be utilized for detecting and tracking objects in different sectors, transforming industrial automation and surveillance setups. By combining color image processing, deep learning, and optimization algorithms, the system proves its effectiveness and flexibility. The innovative approach sets the stage for creating advanced and productive robotic vision systems in various industries. [ABSTRACT FROM AUTHOR]

Renewable microgrids enhance security, reliability, and power quality in power systems by integrating solar and wind sources, reducing greenhouse gas emissions. This paper proposes a machine learning approach, leveraging Gaussian Process (GP) and Krill Herd Algorithm (KHA), for energy management in renewable microgrids with a reconfigurable structure based on remote switching of tie and sectionalizing. The method utilizes Gaussian Process (GP) for modeling hybrid electric vehicle (HEV) charging demand. To counteract HEV charging effects, two scenarios are explored: coordinated and intelligent charging. A novel optimization method inspired by the Krill Herd Algorithm (KHA) is introduced for the complex problem, along with a self-adaptive modification to tailor solutions to specific situations. Simulation on an IEEE microgrid demonstrates efficiency in both scenarios. The predictive model yields a remarkably low Mean Absolute Percentage Error (MAPE) of 1.02381 for total HEV charging demand. Results also reveal a reduction in microgrid operation cost in the intelligent charging scenario compared to coordinated charging. [ABSTRACT FROM AUTHOR]

Leptospirosis is a global disease that impacts people worldwide, particularly in humid and tropical regions, and is associated with significant socio-economic deficiencies. Its symptoms are often confused with other syndromes, which can compromise clinical diagnosis and the failure to carry out specific laboratory tests. In this respect, this paper presents a study of three algorithms (Decision Tree, Random Forest and Adaboost) for predicting the outcome (cure or death) of individuals with leptospirosis. Using the records contained in the government National System of Aggressions and Notification (SINAN, in portuguese) from 2007 to 2017, for the state of Pará, Brazil, where the temporal attributes of health care, symptoms (headache, vomiting, jaundice, calf pain) and clinical evolution (renal failure and respiratory changes) were used. In the performance evaluation of the selected models, it was observed that the Random Forest exhibited an accuracy of 90.81% for the training dataset, considering the attributes of experiment 8, and the Decision Tree presented an accuracy of 74.29 for the validation database. So, this result considers the best attributes pointed out by experiment 10: time first symptoms medical attention, time first symptoms ELISA sample collection, medical attention hospital admission time, headache, calf pain, vomiting, jaundice, renal insufficiency, and respiratory alterations. The contribution of this article is the confirmation that artificial intelligence, using the Decision Tree model algorithm, depicting the best choice as the final model to be used in future data for the prediction of human leptospirosis cases, helping in the diagnosis and course of the disease, aiming to avoid the evolution to death. [ABSTRACT FROM AUTHOR]