Search

Oil–paper insulation is the critical insulation element in the modern power system. Under a harsh operating environment, oil–paper insulation will deteriorate gradually, resulting in electrical accidents. Thus, it is important to evaluate and monitor the insulation state of oil–paper insulation. Firstly, this paper introduces the geometric structure and physical components of oil–paper insulation and shows the main reasons and forms of oil–paper insulation's degradation. Then, this paper reviews the existing condition assessment techniques for oil–paper insulation, such as the dissolved gas ratio analysis, aging kinetic model, cellulose–water adsorption isotherm, oil–paper moisture balance curve, and dielectric response technique. Additionally, the advantages and limitations of the above condition assessment techniques are discussed. In particular, this paper highlights the dielectric response technique and introduces its evaluation principle in detail: (1) collecting the dielectric response data, (2) extracting the feature parameters from the collected dielectric response data, and (3) establishing the condition assessment models based on the extracted feature parameters and the machine learning techniques. Finally, two full potential studies are proposed, which research hotspots' oil–paper insulation and the electrical–chemical joint evaluation technique. In summary, this paper concludes the principles, advantages and limitation of the existing condition assessment techniques for oil–paper insulation, and we put forward two potential research avenues. [ABSTRACT FROM AUTHOR]

The rapid discrimination of bacteria is currently an emerging trend in the fields of food safety, medical detection, and environmental observation. Traditional methods often require lengthy culturing processes, specialized analytical equipment, and bacterial recognition receptors. In response to this need, we have developed a paper-based fluorescence sensor array platform for identifying different bacteria. The sensor array is based on three unique carbon quantum dots (CQDs) as sensing units, each modified with a different antibiotic (polymyxin B, ampicillin, and gentamicin). These antibiotic-modified CQDs can aggregate on the bacterial surface, triggering aggregation-induced fluorescence quenching. The sensor array exhibits varying fluorescent responses to different bacterial species. To achieve low-cost and portable detection, CQDs were formulated into fluorescent ink and used with an inkjet printer to manufacture paper-based sensor arrays. A smartphone was used to collect the responses generated by the bacteria and platform. Diverse machine learning algorithms were utilized to discriminate bacterial types. Our findings showcase the platform's remarkable capability to differentiate among five bacterial strains, within a detection range spanning from 1.0 × 103 CFU/mL to 1.0 × 107 CFU/mL. Its practicality is further validated through the accurate identification of blind bacterial samples. With its cost-effectiveness, ease of fabrication, and high degree of integration, this platform holds significant promise for on-site detection of diverse bacteria. [ABSTRACT FROM AUTHOR]

The article discusses the potential of advanced technologies in the field of cultural heritage. It highlights how these technologies, such as virtual reality, artificial intelligence, and 3D printing, can be used to understand, preserve, and enhance cultural heritage. The article also presents scientific papers from the Florence Heri-Tech International Conference, showcasing the various applications of these technologies. The papers cover topics such as the use of hyperspectral imaging for hieroglyph recognition, the enhancement of user experience in cultural spaces through advanced systems, and the use of non-invasive techniques for conservation. Overall, the article emphasizes the significant impact of technology on the research, preservation, and promotion of cultural heritage. [Extracted from the article]

Paper mills, companies that write scientific papers and gain acceptance for them, then sell authorships of these papers, present a key challenge in medicine and other healthcare fields. This challenge is becoming more acute with artificial intelligence (AI), where AI writes the manuscripts and then the paper mills sell the authorships of these papers. The aim of the current research is to provide a method for detecting fake papers. The method reported in this article uses a machine learning approach to create decision trees to identify fake papers. The data were collected from Web of Science and multiple journals in various fields. The article presents a method to identify fake papers based on the results of decision trees. Use of this method in a case study indicated its effectiveness in identifying a fake paper. This method to identify fake papers is applicable for authors, editors, and publishers across fields to investigate a single paper or to conduct an analysis of a group of manuscripts. Clinicians and others can use this method to evaluate articles they find in a search to ensure they are not fake articles and instead report actual research that was peer reviewed prior to publication in a journal. [ABSTRACT FROM AUTHOR]

Identifying factors that associate with more cited or higher quality research may be useful to improve science or to support research evaluation. This article reviews evidence for the existence of such factors in article text and metadata. It also reviews studies attempting to estimate article quality or predict long‐term citation counts using statistical regression or machine learning for journal articles or conference papers. Although the primary focus is on document‐level evidence, the related task of estimating the average quality scores of entire departments from bibliometric information is also considered. The review lists a huge range of factors that associate with higher quality or more cited research in some contexts (fields, years, journals) but the strength and direction of association often depends on the set of papers examined, with little systematic pattern and rarely any cause‐and‐effect evidence. The strongest patterns found include the near universal usefulness of journal citation rates, author numbers, reference properties, and international collaboration in predicting (or associating with) higher citation counts, and the greater usefulness of citation‐related information for predicting article quality in the medical, health and physical sciences than in engineering, social sciences, arts, and humanities. [ABSTRACT FROM AUTHOR]

The research groups in computer vision, graphics, and machine learning have dedicated a substantial amount of attention to the areas of 3D object reconstruction, augmentation, and registration. Deep learning is the predominant method used in artificial intelligence for addressing computer vision challenges. However, deep learning on three-dimensional data presents distinct obstacles and is now in its nascent phase. There have been significant advancements in deep learning specifically for three-dimensional data, offering a range of ways to address these issues. This study offers a comprehensive examination of the latest advancements in deep learning methodologies. We examine many benchmark models for the tasks of 3D object registration, augmentation, and reconstruction. We thoroughly analyse their architectures, advantages, and constraints. In summary, this report provides a comprehensive overview of recent advancements in three-dimensional deep learning and highlights unresolved research areas that will need to be addressed in the future. [ABSTRACT FROM AUTHOR]

Herein, the challenge of accurately classifying the manufacturing origin of printing paper, including continent, country, and specific product, was addressed. One-dimensional convolutional neural network (1D CNN) models trained on infrared (IR) spectrum data acquired from printing paper samples were used for the task. The preprocessing of the IR spectra through a second-derivative transformation and the restriction of the spectral range to 1800 to 1200 cm-1 improved the classification performance of the model. The outcomes were highly promising. Models trained on second-derivative IR spectra in the 1800 to 1200-cm-1 range exhibited perfect classification for the manufacturing continent and country, with an impressive F1 score of 0.980 for product classification. Notably, the developed 1D CNN model outperformed traditional machine learning classifiers, such as support vector machines and feed-forward neural networks. In addition, the application of data point attribution enhanced the transparency of the decision-making process of the model, offering insights into the spectral patterns that affect classification. This study makes a considerable contribution to printing paper classification, with potential implications for accurate origin identification in various fields. [ABSTRACT FROM AUTHOR]

This document discusses the societal impact of applying artificial intelligence (AI) to traffic and transportation. Sustainable transport is considered crucial for sustainable cities and communities, and AI has the potential to significantly influence daily life in urban areas. The document highlights the interdisciplinary challenges of understanding and coordinating transportation systems, which involve various players with conflicting goals and constraints. It also presents a selection of innovative solutions related to traffic management, including machine learning, reinforcement learning, and optimization approaches. The document concludes by expressing gratitude to the authors, reviewers, and committee members involved in the creation of the special issue. [Extracted from the article]

The evaluation and classification of chemical properties in different copypaper products could significantly help address document forgery. This study analyzes the feasibility of utilizing infrared spectroscopy in conjunction with machine learning algorithms for classifying copy-paper products. A dataset comprising 140 infrared spectra of copy-paper samples was collected. The classification models employed in this study include partial least squares-discriminant analysis, support vector machine, and K-nearest neighbors. The key findings indicate that a classification model based on the use of attenuated-total-reflection infrared spectroscopy demonstrated good performance, highlighting its potential as a valuable tool in accurately classifying paper products and ensuring assisting in solving criminal cases involving document forgery. [ABSTRACT FROM AUTHOR]

Forecasting has extreme importance in industry due to the numerous competitive advantages that it provides, allowing to foresee what might happen and adjust management decisions accordingly. Industries increasingly use sensors, which allow for large-scale data collection. Big datasets enable training, testing and application of complex predictive algorithms based on machine learning models. The present paper focuses on predicting values from sensors installed on a pulp paper press, using data collected over three years. The variables analyzed are electric current, pressure, temperature, torque, oil level and velocity. The results of XGBoost and artificial neural networks, with different feature vectors, are compared. They show that it is possible to predict sensor data in the long term and thus predict the asset's behaviour several days in advance. [ABSTRACT FROM AUTHOR]

This document is a special issue of the journal Algorithms, featuring selected papers from the journal's editorial board members from 2022 and 2023. The issue includes 16 research papers covering a range of topics such as game theory, fault detection in cellular networks, optimization algorithms, machine learning, cryptocurrency trading, and more. Each paper presents its own unique research findings and methodologies. The issue aims to showcase the diverse research interests and expertise of the journal's editorial board members. [Extracted from the article]

• Machine Learning to classify watermarked Italian paper. • XRF and FTIR spectroscopies to study late middle-aged Italian watermarked paper. • A new spatial-temporal approach to trace the local recipes and the geographical paper mills' production. • Bergamo and Bologna stand out as marked watermarked Italian paper mills. Manuscripts, illuminated codex, books, documents and letters are composite materials, traces of the past starting from the invention of the writing. In this context, dating is one of the most important information for document attribution, and watermarked papeItaly'smarkers for studying their time-spatial distribution. In the Late Middle Ages, Italy's most important centre of paper mill was located in the town of Fabriano (Marche region, Italy). Here, a selection of ten Italian Late Middle Ages watermarked papers belonging to the Corpus Chartarum Italicarum (Corpus of Italian papers) is characterised by elemental and molecular spectroscopies and collected data are analysed by Machine Learning (ML) to trace the local fabrication recipes and the geographical paper mills production. Data from portable X-ray fluorescence and Fourier transform infrared spectroscopy were analysed through Singular Vector Machine, Soft Independent Modeling of Class Analogy and Moving Blocks methods. This innovative ML spatial-temporal approach based on keeping the temporal variable fixed is used to find elemental benchmarks for classifying the watermarked Italian notarial catalogue of the Late Middle Ages finding differences in the local recipes and studying the homogeneity in the paper mills' production. Results show that watermarked paper from Northern Italy, from the town of Strozza, Piacenza and Bergamo , as well as Bologna, present a high elemental and molecular homogeneity, which indicates that the hand-made processing technique could be the same helped by the proximity of the three cities, starting point for technologies exchange or influence. No heavy metals are found in the watermarked paper and K, Ca, Fe and Zn are identified as elemental benchmarks. Finally, Ca, Ti, Mn, Cr and Fe are particularly present on the edges of the watermarked papers. [Display omitted] [ABSTRACT FROM AUTHOR]

Conjecture about the weak replicability in social sciences has made scholars eager to quantify the scale and scope of replication failure for a discipline. Yet small-scale manual replication methods alone are ill-suited to deal with this big data problem. Here, we conduct a discipline-wide replication census in science. Our sample (N= 14,126 papers) covers nearly all papers published in the six top-tier Psychology journals over the past 20 y. Using a validated machine learning model that estimates a paper's likelihood of replication, we found evidence that both supports and refutes speculations drawn from a relatively small sample of manual replications. First, we find that a single overall replication rate of Psychology poorly captures the varying degree of replicability among subfields. Second, we find that replication rates are strongly correlated with research methods in all subfields. Experiments replicate at a significantly lower rate than do non-experimental studies. Third, we find that authors' cumulative publication number and citation impact are positively related to the likelihood of replication, while other proxies of research quality and rigor, such as an author's university prestige and a paper's citations, are unrelated to replicability. Finally, contrary to the ideal that media attention should cover replicable research, we find that media attention is positively related to the likelihood of replication failure. Our assessments of the scale and scope of replicability are important next steps toward broadly resolving issues of replicability. [ABSTRACT FROM AUTHOR]

The number of scientific papers has been increasing ever more rapidly. Researchers have to spend a lot of time classifying papers relevant to their study, especially into fine-grained subfields. However, almost all existing paper classification models are coarse-grained, which can not meet the needs of researchers. Observing this, we propose a lightweight fine-grained classification model for scientific paper. Dynamic weighting coefficients on feature words are incorporated into the model to improve the classification accuracy. The feature word weight is optimized by the Mean Decrease Accuracy (MDA) algorithm. Considering applicability, the lightweight processing is conducted through algorithm pruning and training sample pruning. Comparison with mainstream models shows simultaneous improvement in accuracy and time efficiency by our model. [ABSTRACT FROM AUTHOR]

The deterioration of fiber properties during recycling processes, especially the loss of tensile strength, raises concerns that paper products made from recycled fibers might not satisfy quality requirements. The purpose of this paper is to estimate the deterioration of tensile strength and the damage in paper sheets made of recycled fibers using the theory of damage mechanics and machine learning methods. Experiments were carried out to recycle wood fibers and nonwood fibers four times, and the physicochemical properties of the handsheets made from these fibers were measured after each recycling. Water retention value and relative bonded area were selected as the features to estimate and predict tensile strength during recycling because they had strong correlations with tensile strength. This paper proposed a damage index to quantitatively express the severity of the damage in paper sheets based on the experimental investigation and the theory of damage mechanics. Thus, the deterioration of tensile strength could be estimated and predicted. To determine the damage index, a curve fitting model based on the hyperbolic theory of pulp properties was developed. The proposed quantitative expression of the damage index is: D = (Ds - h)²/a2 - (Dh - k)²/b2, where the coefficients were determined through the curve fitting model. This paper also developed a long short-term memory recurrent neural network model to determine the damage index according to the sequence of recycling. Both models were trained with the experimental data of water retention value and relative bonded area. The estimation and prediction by the curve fitting model were more accurate than those of the neural network model. The root mean square errors by the curve fitting model were 0.0278 for estimation, 0.1667 for prediction; and by the neural network model were 0.2445 for estimation, 0.2206 for prediction, respectively. After the damage index was determined, the deterioration of tensile strength then could be calculated as T = T0 (1-D). [ABSTRACT FROM AUTHOR]

Keyword extraction is the task of identifying important terms or phrase that are most representative of the source document. Although the process of automatic extraction of keywords from title is an old method, it was mainly for extraction from a single web document. Our approach differs from previous research works on keyword extraction in several aspects. For those who are non-expert of the scientific fields, understating scientific research trends is difficult. The purpose of this study is to develop an automatic method of obtaining overviews of a scientific field for non-experts by capturing research trends. This empirical study excavates significant term extraction using Natural Language Processing (NLP) tools. More than 15000 titles saved in a .csv file was our dataset and scripts written in Python were our process to compare how far significant terms of scientific title corpus are similar or different to the terms available in the abstract of that same scientific article corpus. A light-weight unsupervised title extractor, Yet Another Keyword Extractor (YAKE) was used to extract the results. Based on our analysis, it can be concluded that these algorithms can be used for other fields too by the non-experts of that subject field to perform automatic extraction of significant words and understanding trends. Our algorithm could be a solution to reduce the labour-intensive manual indexing process. [ABSTRACT FROM AUTHOR]

Today's software industry is global, virtual, and depending more than ever on strong and reliable processes. Stakeholders and infrastructure are distributed across the globe, posing challenges that go beyond those with co‐located teams and servers. Software Engineering continues to be a complex undertaking, with projects challenged to meet expectations, especially regarding costs. We know that Software Engineering is an ever‐changing discipline, with the result that firms and their employees must regularly embrace new methods, tools, technologies, and processes. In 2020, the International Conference on Global Software Engineering (ICGSE) and the International Conference on Systems and Software Processes (ICSSP) joined forces aiming to create a holistic understanding of the software landscape both from the perspective of human and infrastructure distribution and also the processes to support software development. Unfortunately, these challenges have become even more personal to many more in 2020 due to the disruption introduced by the COVID‐19 pandemic, which forced both conferences to be held virtually. As an outcome of the joint event, we selected a set of the best papers from the two conferences, which were invited to submit extended versions to this Special Issue in the Journal of Software: Maintenance and Evolution. Dedicated committees were established to identify the best papers. Eight papers were invited and ultimately, seven of these invited papers have made it into this Special Issue. [ABSTRACT FROM AUTHOR]

Machine learning has been leveraged for image analysis applications throughout a multitude of subspecialties. This position paper provides a perspective on the evolutionary trajectory of practical deep learning tools for genitourinary pathology through evaluating the most recent iterations of such algorithmic devices. Deep learning tools for genitourinary pathology demonstrate potential to enhance prognostic and predictive capacity for tumor assessment including grading, staging, and subtype identification, yet limitations in data availability, regulation, and standardization have stymied their implementation. [ABSTRACT FROM AUTHOR]

The development of an advanced analytical platform with regard to SARS-CoV-2 is crucial for public health. Herein, we present a machine learning platform based on paper-assisted ratiometric fluorescent sensors for highly sensitive detection of the SARS-CoV-2 RdRp gene. The assay involves target-induced rolling circle amplification to generate magnetic DNAzyme, which is then detectable using the paper-assisted ratiometric fluorescent sensor. This sensor detects the SARS-CoV-2 RdRp gene with a visible-fluorescence color response. Moreover, leveraging different fluorescence responses, the ResNet algorithm of machine learning assists in accurately identifying fluorescence images and differentiating the concentration of the SARS-CoV-2 RdRp gene with over 99% recognition accuracy. The machine learning platform exhibits exceptional sensitivity and color responsiveness, achieving a limit of detection of 30 fM for the SARS-CoV-2 RdRp gene. The integration of intelligent artificial vision with the paper-assisted ratiometric fluorescent sensor presents a novel approach for the on-site detection of COVID-19 and holds potential for broader use in disease diagnostics in the future. [ABSTRACT FROM AUTHOR]

Handmade paper is a major carrier and restoration material of traditional Chinese ancient books, calligraphies, and paintings. In this study, we carried out a Raman spectroscopy analysis of 18 types of handmade paper samples. The main components of the handmade paper were cellulose and lignin, according to the wavenumber and Raman vibration assignment. We divided its Raman spectrum into eight subbands. Five machine learning models were employed: principal component analysis (PCA), partial least squares (PLS), support vector machine (SVM), k‐nearest neighbors (KNN), and random forest (RF). The Raman spectral data were normalized, and the fluorescence envelope was subtracted using the airPLS algorithm to obtain four types of data, raw, normalized, defluorescence, and fluorescence data. An RF variable importance analysis of data processing showed that data normalization eliminated the intensity differences of fluorescence signals caused by lignin, which contained important information of raw materials and papermaking technology, let alone the data defluorescence. The data processing also reduced the importance of the average variables in almost all spectral bands. Nevertheless, the data processing is worthwhile because it significantly improves the accuracy of machine learning, and the information loss does not affect the prediction. Using the machine learning models of PCA, PLS, and SVM combined with linear regression (LR), KNN, and RF, the classification and prediction of handmade paper samples were realized. For almost all processed data, including the fluorescence data, PCA‐LR had the highest classification and prediction accuracy (R2 = 1) in almost all spectral bands. PLS‐LR and SVM‐LR had the second‐highest accuracies (R2 = 0.4–0.9), whereas KNN and RF had the lowest accuracies (R2 = 0.1–0.4) for full band spectral data. Our results suggest that the abundant information contained in Raman spectroscopy combined with powerful machine learning models could inspire further studies on handmade paper and related cultural relics. [ABSTRACT FROM AUTHOR]

Since the beginning of the COVID-19 pandemic, many works have been published proposing solutions to the problems that arose in this scenario. In this vein, one of the topics that attracted the most attention is the development of computer-based strategies to detect COVID-19 from thoracic medical imaging, such as chest X-ray (CXR) and computerized tomography scan (CT scan). By searching for works already published on this theme, we can easily find thousands of them. This is partly explained by the fact that the most severe worldwide pandemic emerged amid the technological advances recently achieved, and also considering the technical facilities to deal with the large amount of data produced in this context. Even though several of these works describe important advances, we cannot overlook the fact that others only use well-known methods and techniques without a more relevant and critical contribution. Hence, differentiating the works with the most relevant contributions is not a trivial task. The number of citations obtained by a paper is probably the most straightforward and intuitive way to verify its impact on the research community. Aiming to help researchers in this scenario, we present a review of the top-100 most cited papers in this field of investigation according to the Google Scholar search engine. We evaluate the distribution of the top-100 papers taking into account some important aspects, such as the type of medical imaging explored, learning settings, segmentation strategy, explainable artificial intelligence (XAI), and finally, the dataset and code availability. [ABSTRACT FROM AUTHOR]

Biohazards, which may occur at all supply chain stages, pose significant threats to food safety and public health. Addressing these concerns and enhancing food safety necessitates a nondestructive pathogen surveillance approach capable of continuously and simultaneously detecting multiple pathogens. Detecting and differentiating low concentrations of pathogenic bacteria amid high background microflora levels in foods is challenging, requiring technology with high sensitivity and robust discriminatory capability. This study introduces an artificial neural network-driven paper chromogenic array sensor (ANN-PCA) technique developed for the nondestructive, continuous, and simultaneous detection of Salmonella Enteritidis (SE) and Escherichia coli O157:H7 (Ec) from a high background microflora in shredded cheddar cheese. This method enables accurate detection of SE and Ec in monoculture and cocktail culture while distinguishing them from a high level of background microflora (∼7.5 log CFU/g), with accuracies ranging from 72 ± 11% to 92 ± 3%. In addition, SE and Ec were successfully identified at concentrations as low as 1 log CFU/g within one day, with an accuracy of 72 ± 11%. This approach exhibits promising potential for integration into a digitalized, smart, and resilient nondestructive surveillance system for real-time pathogen detection in foods throughout the supply chain without enrichment, incubation, or other sample preparation steps. [Display omitted] • Development of a machine learning-driven paper chromogenic array sensor approach. • Non-destructive, continuous, and simultaneous detection of multiple pathogens. • Detection of pathogenic bacteria from a high level of background microflora. • The approach provided potential detection for pathogens throughout the food supply chain. [ABSTRACT FROM AUTHOR]

Present report demonstrates the application of Sb 0.3 Sn 0.7 Se 2 single crystal as a paper based flexible photodetector. Direct vapour transport grown bulk crystals of Sb 0.3 Sn 0.7 Se 2 has been converted to nanosheets by chemical assisted exfoliation process. The paper-based photodetector is fabricated and the switching action is studied. Tuning of photodetector has been carried out by 670 nm laser illumination for different bias voltages. Temporal photo-response is also studied under polychromatic light with different intensities in vacuum and open environment. The low temperature stability of photodetector has been studied for temperature range 300 K–180 K. Experimental results are obtained in terms of time resolved photocurrent under different illumination and atmospheric conditions. The flexibility and stability are also examined in detail for fabricated detector. Overall, the results suggest the application of Sb 0.3 Sn 0.7 Se 2 as a versatile flexible photodetector. Additionally, the machine learning (ML) model is trained and tested using an experimental photocurrent dataset that has a complex material design with variations in time, bias voltage, intensity, and temperature. The k-nearest neighbor algorithm exhibited outstanding performance, achieving the highest R2 value of 0.9986 when applied to a temperature dataset, with a test size of 0.4. Performance metrics such as mean absolute error and root mean squared error of various test sizes ranging from 0.4 to 0.6 are used to assess the model's accuracy and robustness in changing conditions. This comprehensive analysis not only establishes a platform for future experimental optimization of photodetector materials but also underscores the efficacy of ML regression techniques in developing high-performance photodetectors. [Display omitted] • Chemical assisted exfoliation process were used for the synthesis of SbSnSe2 nanosheets. • Synthesized nanosheets were decorated on paper for the fabrication of flexible photo-detector. • The photodetection application was demonstrated for different atmospheric conditions and different illuminations. • Low temperature stability of the detector was also studied. • KNN Machine learning model were applied to the experimental data for the prediction of photodetection behavior. [ABSTRACT FROM AUTHOR]

Traditionally, specific bioreceptors such as antibodies have rapidly identified bacterial species in environmental water samples. However, this method has the disadvantages of requiring an additional process to conjugate or immobilize bioreceptors on the assay platform, which becomes unstable at room temperature. Here, we demonstrate a novel mix-and-match method to identify bacteria species by loading the bacterial samples with simple bacteria interacting components (not bioreceptors), such as lipopolysaccharides, peptidoglycan, and bovine serum albumin, and carboxylated particles, all separately on multiple channels. Neither covalent conjugation nor surface immobilization was necessary. Interactions between bacteria and the above bacteria interacting components resulted in varied surface tension and viscosity, leading to various flow velocities of capillary action through the paper fibers. The smartphone camera and a custom Python code recorded multiple channel flow velocity, each loaded with different bacteria interacting components. A multi-dimensional data set was obtained for a given bacterial species and concentration and used as a machine learning training model. A support vector machine was applied to classify the six bacterial species: Escherichia coli, Salmonella Typhimurium, Pseudomonas aeruginosa, Staphylococcus aureus, Enterococcus faecium, and Bacillus subtilis. Under optimized conditions, the training model predicts the bacterial species with an accuracy of > 85% of the six bacteria species. [ABSTRACT FROM AUTHOR]

Dimensionality Reduction (DR) is the process of reducing the numerous features or random variables under consideration to a limited number of features by obtaining a set of principal variables. These techniques cater great values in machine learning, which come in handy to simplify a classification or a regression dataset, thereby yielding a better-performing predictive model. Techniques used for DR include Feature Selection methods, Matrix Factorization, AutoEncoder methods, and Manifold Learning. Merits of DR include data compression, reduced space of storage, and removal of redundant features. This paper attempts to review various techniques used to carry out dimensionality reduction while providing an exhaustive comparative study over the merits and demerits of each of the techniques used under the empirical experiments performed by the authors whose work is being reviewed. [ABSTRACT FROM AUTHOR]

• Five Machine Learning (ML) models compared for wave height time series prediction. • Complex ML models do not outperform simple AR in wave height time series prediction. • Comment to related papers: signal decomposition in test set series is WRONG. Significant Wave Height (SWH) is crucial in many aspect of ocean engineering. The accurate prediction of SWH has therefore been of immense practical value. Recently, Artificial Intelligence (AI) time series prediction methods have been widely used for single-point short-term SWH time-series forecasting, resulting in many AI-based models claiming to achieve good results. However, the extent to which these complex AI models can outperform traditional methods has largely been overlooked. This study compared five different models - AutoRegressive (AR), eXtreme Gradient Boosting (XGB), Artificial Neural Network (ANN), Long Short-Term Memory (LSTM), and WaveNet - for their performance on SWH time series prediction at 16 buoy locations. Surprisingly, the results suggest that the differences of performance among different models are negligible, indicating that all these AI models have only "learned" the linear auto-regression from the data. Additionally, we noticed that many recent studies used signal decomposition method for such time series prediction, and most of them decomposed the test sets, which is WRONG. [ABSTRACT FROM AUTHOR]

One of the most widely used measures of scientific impact is the number of citations. However, due to its heavy-tailed distribution, citations are fundamentally difficult to predict but can be improved. This study was aimed at investigating the factors and parts influencing the citation number of a scientific paper in the otology field. Therefore, this work proposes a new solution that utilizes machine learning and natural language processing to process English text and provides a paper citation as the predicted results. Different algorithms are implemented in this solution, such as linear regression, boosted decision tree, decision forest, and neural networks. The application of neural network regression revealed that papers' abstracts have more influence on the citation numbers of otological articles. This new solution has been developed in visual programming using Microsoft Azure machine learning at the back end and Programming Without Coding Technology at the front end. We recommend using machine learning models to improve the abstracts of research articles to get more citations. [ABSTRACT FROM AUTHOR]

The paper reports the results of a comparative assessment concerned with the effectiveness of identifying the basic forms of partial discharges (PD) measured by the acoustic emission technique (AE), carried out by application of selected machine learning methods. As part of the re-search, the identification involved AE signals registered in laboratory conditions for eight basic classes of PDs that occur in paper-oil insulation systems of high-voltage power equipment. On the basis of acoustic signals emitted by PDs and by application of the frequency descriptor that took the form of a signal power density spectrum (PSD), the assessment involved the possibility of identifying individual types of PD by the analyzed classification algorithms. As part of the research, the results obtained with the use of five independent classification mechanisms were analyzed, namely: k-Nearest Neighbors method (kNN), Naive Bayes Classification, Support Vector Machine (SVM), Random Forests and Probabilistic Neural Network (PNN). The best results were achieved using the SVM classification tuned with polynomial core, which obtained 100% accuracy. Similar results were achieved with the kNN classifier. Random Forests and Naïve Bayes obtained high accuracy over 97%. Throughout the study, identification algorithms with the highest effectiveness in identifying specific forms of PD were established. [ABSTRACT FROM AUTHOR]

Citation information in scholarly data is an important source of insight into the reception of publications and the scholarly discourse. Outcomes of citation analyses and the applicability of citation-based machine learning approaches heavily depend on the completeness of such data. One particular shortcoming of scholarly data nowadays is that non-English publications are often not included in data sets, or that language metadata is not available. Because of this, citations between publications of differing languages (cross-lingual citations) have only been studied to a very limited degree. In this paper, we present an analysis of cross-lingual citations based on over one million English papers, spanning three scientific disciplines and a time span of three decades. Our investigation covers differences between cited languages and disciplines, trends over time, and the usage characteristics as well as impact of cross-lingual citations. Among our findings are an increasing rate of citations to publications written in Chinese, citations being primarily to local non-English languages, and consistency in citation intent between cross- and monolingual citations. To facilitate further research, we make our collected data and source code publicly available. [ABSTRACT FROM AUTHOR]

Microfluidic paper-based analytical devices (μPADs) have been widely used in point-of-care testing owing to their simple operation, low volume of the sample required, and the lack of the need for an external force. To obtain accurate semi-quantitative or quantitative results, μPADs need to respond to the challenges posed by differences in reaction conditions. In this paper, multi-layer μPADs are fabricated by the imprinting method for the colorimetric detection of C-reactive protein (CRP). Different lighting conditions and shooting angles of scenes are simulated in image acquisition, and the detection-related performance of μPADs is improved by using a machine learning algorithm. The You Only Look Once (YOLO) model is used to identify the areas of reaction in μPADs. This model can observe an image only once to predict the objects present in it and their locations. The YOLO model trained in this study was able to identify all the reaction areas quickly without incurring any error. These reaction areas were categorized by classification algorithms to determine the risk level of CRP concentration. Multi-layer perceptron, convolutional neural network, and residual network algorithms were used for the classification tasks, where the latter yielded the highest accuracy of 96%. It has a promising application prospect in fast recognition and analysis of μPADs. [ABSTRACT FROM AUTHOR]

This document highlights two studies published in the Asian Journal of Ecotoxicology. The first study focuses on the development of machine learning models to screen chemicals with hepatotoxicity, or liver toxicity. The models were trained using a dataset of 4014 chemicals and achieved good performance in predicting hepatotoxicity. The second study explores the use of machine learning methods to screen chemicals that induce autonomic dysfunction, a condition affecting the autonomic nervous system. The study developed a model using a dataset of 466 positive and 427 negative samples and identified structural alerts associated with autonomic dysfunction. Both studies provide valuable tools for screening and evaluating toxic chemicals. [Extracted from the article]

Artificial intelligence is more present than ever, both in our society in general and in science. At the center of this development has been the concept of deep learning, the use of artificial neural networks that are many layers deep and can often reproduce human‐like behavior much better than other machine‐learning techniques. The articles in this collection are some recent examples of its application for X‐ray photon science and crystallography that have been published in Journal of Applied Crystallography. [ABSTRACT FROM AUTHOR]

To achieve clinical impact in daily oncological practice, emerging AI-based cancer imaging research needs to have clearly defined medical focus, AI methods, and outcomes to be estimated. AI-supported cancer imaging should predict major relevant clinical endpoints, aiming to extract associations and draw inferences in a fair, robust, and trustworthy way. AI-assisted solutions as medical devices, developed using multicenter heterogeneous datasets, should be targeted to have an impact on the clinical care pathway. When designing an AI-based research study in oncologic imaging, ensuring clinical impact in AI solutions requires careful consideration of key aspects, including target population selection, sample size definition, standards, and common data elements utilization, balanced dataset splitting, appropriate validation methodology, adequate ground truth, and careful selection of clinical endpoints. Endpoints may be pathology hallmarks, disease behavior, treatment response, or patient prognosis. Ensuring ethical, safety, and privacy considerations are also mandatory before clinical validation is performed. The Artificial Intelligence for Health Imaging (AI4HI) Clinical Working Group has discussed and present in this paper some indicative Machine Learning (ML) enabled decision-support solutions currently under research in the AI4HI projects, as well as the main considerations and requirements that AI solutions should have from a clinical perspective, which can be adopted into clinical practice. If effectively designed, implemented, and validated, cancer imaging AI-supported tools will have the potential to revolutionize the field of precision medicine in oncology. [ABSTRACT FROM AUTHOR]

Due to the increasing size of integrated circuits (ICs), their design and optimization phases (i.e., computer-aided design, CAD) grow increasingly complex. At design time, a large design space needs to be explored to find an implementation that fulfills all specifications and then optimizes metrics like energy, area, delay, reliability, etc. At run time, a large configuration space needs to be searched to find the best set of parameters (e.g., voltage/frequency) to further optimize the system. Both spaces are infeasible for exhaustive search typically leading to heuristic optimization algorithms that find some tradeoff between design quality and computational overhead. Machine learning (ML) can build powerful models that have successfully been employed in related domains. In this survey, we categorize how ML may be used and is used for design-time and run-time optimization and exploration strategies of ICs. A metastudy of published techniques unveils areas in CAD that are well explored and underexplored with ML, as well as trends in the employed ML algorithms. We present a comprehensive categorization and summary of the state of the art on ML for CAD. Finally, we summarize the remaining challenges and promising open research directions. [ABSTRACT FROM AUTHOR]

• Qualitative and quantitative detection of amine gases could be achieved by CSA. • A visible detection of beef freshness using the amine-responsive CSA was proposed. • ResNet34 had the best performance for beef freshness detection based on CSA. • T-SNE could further visualize and understand the classification process of DL. This study developed an innovative approach that combines a colourimetric sensor array (CSA) composed of twelve pH-response dyes with advanced algorithms, aiming to detect amine gases and assess the freshness of chilled beef. With the assistance of multivariate statistical analysis, the sensor array can effectively distinguish five amine gases and enable rapid quantification of trimethylamine vapour with a limit of detection (LOD) of 8.02 ppb and visually monitor the fresh levels of chilled beef. Moreover, the utilization of deep learning models (ResNet34, VGG16, and GoogleNet) for chilled beef freshness evaluation achieved an overall accuracy of 98.0 %. Furthermore, t -distributed stochastic neighbour embedding (t -SNE) visualized the feature extraction process and provided explanations to understand the classification process of deep learning. The results demonstrated that applying deep learning techniques in the process of pattern recognition of CSA can help in realizing the rapid, robust, and accurate assessment of chilled beef freshness. [ABSTRACT FROM AUTHOR]

Global food systems can benefit significantly from continuous monitoring of microbial food safety, a task for which tedious operations, destructive sampling, and the inability to monitor multiple pathogens remain challenging. This study reports significant improvements to a paper chromogenic array sensor - machine learning (PCA-ML) methodology sensing concentrations of volatile organic compounds (VOCs) emitted on a species-specific basis by pathogens by streamlining dye selection, sensor fabrication, database construction, and machine learning and validation. This approach enables noncontact, time-dependent, simultaneous monitoring of multiple pathogens (Listeria monocytogenes , Salmonella , and E. coli O157:H7) at levels as low as 1 log CFU/g with over 90% accuracy. The report provides theoretical and practical frameworks demonstrating that chromogenic response, including limits of detection, depends on time integrals of VOC concentrations. The paper also discusses the potential for implementing PCA-ML in the food supply chain for different food matrices and pathogens, with species- and strain-specific identification. [ABSTRACT FROM AUTHOR]

With the increasing integration of AI tools like Yewno Discover, Scholarcy, and Grammarly in academic libraries, undergraduate research has witnessed transformative changes. These tools, while elevating the research process, also bring forth challenges rooted in ethics and application. This paper explores the synergy between modern technology and academic exploration, highlighting the benefits and potential pitfalls of using AI in the research workflow. It emphasizes that while Yewno Discover and similar tools offer streamlined navigation of vast information databases, it is imperative for undergraduates to remain cognizant of potential biases and other ethical considerations. This paper underscores the need for proactive measures in academic settings, including specialized training and policy development, to ensure that undergraduate researchers harness the power of AI responsibly and efficiently. [ABSTRACT FROM AUTHOR]

• A machine learning approach was used to investigate moisture penetration in paper materials. • The study evaluated the capabilities of both the Feedforward Neural Network (FNN) and the Recurrent Neural Network (RNN). • Numerically generated data was employed for network training. • A continuum model incorporating anisotropic properties, creep behavior, viscoelasticity, and moisture dependency was used for simulations. • The RNN demonstrated superior predictive capability compared to the FNN. In this work, we predicted the gradient of the deformational moisture dynamics in a sized commercial paper by observing the curl deformation in response to the one-sided water application. The deformational moisture is a part of the applied liquid which ends up in the fibers causing swelling and subsequent mechanical response of the entire fiber network structure. The adapted approach combines traditional experimental procedures, advanced machine learning techniques and continuum modeling to provide insights into the complex phenomenon relevant to ink-jet digital printing in which the sized and coated paper is often used, meaning that not all the applied moisture will reach the fibers. Key material properties including elasticity, plastic parameters, viscoelasticity, creep, moisture dependent behavior, along with hygroexpansion coefficients are identified through extensive testing, providing vital data for subsequent simulation using a continuum model. Two machine learning models, a Feedforward Neural Network (FNN) and a Recurrent Neural Network (RNN), are probed in this study. Both models are trained using exclusively numerically generated moisture profile histories, showcasing the value of such data in contexts where experimental data acquisition is challenging. These two models are subsequently utilized to predict moisture profile history based on curl experimental measurements, with the RNN demonstrating superior accuracy due to its ability to account for temporal dependencies. The predicted moisture profiles are used as inputs for the continuum model to simulate the associated curl response comparing it to the experiment representing "never seen" data. The result of comparison shows highly predictive capability of the RNN. This study melds traditional experimental methods and innovative machine learning techniques, providing a robust technique for predicting moisture gradient dynamics that can be used for both optimizing the ink solution and paper structure to achieve desirable printing quality with lowest curl propensities during printing. [ABSTRACT FROM AUTHOR]

Identifying the genes and mutations that drive the emergence of tumors is a critical step to improving our understanding of cancer and identifying new directions for disease diagnosis and treatment. Despite the large volume of genomics data, the precise detection of driver mutations and their carrying genes, known as cancer driver genes, from the millions of possible somatic mutations remains a challenge. Computational methods play an increasingly important role in discovering genomic patterns associated with cancer drivers and developing predictive models to identify these elements. Machine learning (ML), including deep learning, has been the engine behind many of these efforts and provides excellent opportunities for tackling remaining gaps in the field. Thus, this survey aims to perform a comprehensive analysis of ML-based computational approaches to identify cancer driver mutations and genes, providing an integrated, panoramic view of the broad data and algorithmic landscape within this scientific problem. We discuss how the interactions among data types and ML algorithms have been explored in previous solutions and outline current analytical limitations that deserve further attention from the scientific community. We hope that by helping readers become more familiar with significant developments in the field brought by ML, we may inspire new researchers to address open problems and advance our knowledge towards cancer driver discovery. [ABSTRACT FROM AUTHOR]

Efficient control loop performance is pivotal in process industries to ensure optimal production, maintain product quality, and adhere to regulatory standards. Poorly tuned controllers can disrupt these objectives, necessitating accurate detection methods. This paper introduces a novel approach for detecting poor controller tuning through advanced techniques: the Gramian Angular Field (GAF) and Stack Auto-Encoder (SAE). Unlike manual methods, this automated system promptly identifies poorly tuned controllers, offering real-time monitoring and timely alerts to operators. The proposed methodology is substantiated through two case studies: the ISDB dataset and the pulp and paper dataset. The outcomes illustrate that the proposed approach correctly determines the appropriate outcome for the majority of the analyzed control loops across diverse industries. • New method detects poorly tuned controllers via Gramian angular field and SAE. • PV and OP images help SAE distinguish poor tuning from other oscillation causes. • Transfer learning has been used to improve methodology's effectiveness. • Tested on benchmark control loops, yielding accurate verdicts for most cases. [ABSTRACT FROM AUTHOR]

The traditional method for transformer moisture diagnosis is to establish empirical equations between feature parameters extracted from frequency domain spectroscopy (FDS) and the transformer’s moisture content. However, the established empirical equation may not be applicable to a novel testing environment, resulting in an unreliable evaluation result. In this regard, it is acknowledged that FDS combined with machine learning is more suitable for estimating moisture content in a variety of test environments. Nonetheless, the accuracy of the estimation results obtained using the existing method is limited by the algorithm’s inability to generalize. To address this issue, we propose an AdaBoost algorithm-enhanced back-propagation neural network (BP_AdaBoost). This study creates a database by extracting feature parameters from the FDS that characterize the insulation states of the prepared samples. Then, using the BP_AdaBoost algorithm and the newly constructed database, the moisture estimation models are trained. Finally, the results of the estimation are discussed in terms of laboratory and field transformers. By comparing the proposed BP_AdaBoost algorithm to other intelligence algorithms, it is demonstrated that it not only performs better in generalization, but also maintains a high level of accuracy. [ABSTRACT FROM AUTHOR]

Introduction/purpose: Anomaly detection-based Network Intrusion Detection Systems (NIDSs) have emerged as a valuable tool, particularly in military fields, for protecting networks against cyberattacks, specifically focusing on Netflow data, to identify normal and abnormal patterns. This study investigates the effectiveness of anomaly-based machine learning (ML) and deep learning (DL) models in NIDSs using the publicly available NF-UQ-NIDS dataset, which utilizes Netflow data, with the aim of enhancing network protection. Methods: The authors Sarhan, M., Layeghy, S., Moustafa, N. and Portmann, M. in the conference paper Big Data Technologies and Applications, in 2021, involve a preprocessing step where 8 features are selected for the training phase out of the 12 available features. Notably, the IP source and destination addresses, as well as their associated ports, are specifically excluded. The novelty of this paper lies in the preprocessing of the excluded features and their inclusion in the training phase, employing various classification ML and DL algorithms such as ExtraTrees, ANN, simple CNN, and VGG16 for binary classification. Results: The performance of the classification models is evaluated using metrics such as accuracy, recall, etc., which provide a comprehensive analysis of the obtained results. The results show that the ExtraTrees ML model outperforms all other models when using our preprocessing features, achieving a classification accuracy of 99.09%, compared to 97.25% in the reference dataset. Conclusion: The study demonstrates the effectiveness of anomalybased ML and DL models in NIDSs using Netflow data. [ABSTRACT FROM AUTHOR]

[Display omitted] • 3D-ACM involves two rounds of Hilbert transform and tensor product operations. • It significantly enhances the equivalent frequency points and sample numbers. • The R-squared values for PLS-LR, KNN, RF and CNN models approach or equal 1. • These supervised models are comparable to unsupervised models such as PCA-LR. We have developed a novel 3D asynchronous correlation method (3D-ACM) designed for the classification and identification of Chinese handmade paper samples using Raman spectra and machine learning. The 3D-ACM approach involves two rounds of tensor product and Hilbert transform operations. In the tensor product process, the outer product of the spectral data from different samples within the same category is computed, establishing inner connections among all samples within that category. The Hilbert transform introduces a 90-degree phase shift, resulting in a true three-dimensional spectral data structure. This expansion significantly increases the number of equivalent frequency points and samples within each category. This enhancement substantially boosts spectral resolution and reveals more hidden information within the spectral data. To maximize the potential of 3D-ACM, we employed six machine learning models: principal component analysis (PCA) with linear regression (LR), support vector machine (SVM) with LR, k-Nearest Neighbors (KNN), random forest (RF), and convolutional neural network (CNN). When applied to the 3D-ACM data preprocessing method, R-squared values of PLS-LR, KNN, RF and CNN supervised models, approached or equaled 1. This indicates exceptional performance comparable to unsupervised models like PCA. 3D-ACM stands as a versatile mathematical technique not confined to spectral data. It also eliminates the necessity for additional experimental setups or external control conditions, distinct from traditional two-dimensional correlation spectroscopy. Moreover, it preserves the original experimental data, setting it apart from conventional data preprocessing methods. This positions 3D-ACM as a promising tool for future material classification and identification in conjunction with machine learning. [ABSTRACT FROM AUTHOR]

[Display omitted] • A novel analytical technique for colorimetric glucose determination on µPADs. • Non-invasive sweat glucose detection independent of sample volume. • Seamless operation: no extra gadgets nor smartphone camera is required. • Computationally inexpensive readout on portable Arm platforms demonstrated. The colorimetric method is widely exploited for glucose measurement on microfluidic paper-based and microfluidic thread/paper-based analytical devices, μPADs and μTPADs, respectively. However, two significant challenges still hinder the real-world applications: the variation of the generated color based on sample volume variation, and the consistent dependency on an imaging camera - usually a smartphone camera - for color readout. The latter also suffers from multiple limitations, such as the variable ambient light conditions and imaging variation among different smartphone brands and models. This manuscript suggests a new device demonstrating a novel viewpoint to the colorimetric method to address both aforementioned challenges. The presented device, Volume-Independent Autonomous box (VIA box), continuously monitors the transient color of the µPAD upon the introduction of the sample till color stabilization, in contrast to similar studies where merely the final stabilized color is read. The interpretation of the transient color profile with respect to time results in the measurement of the glucose level independent of sample volume. In addition, the VIA box monitors µPAD's color using an ordinary RGB sensor instead of an imaging camera in similar studies. Since merely RGB values are recorded in any measurement instance, the computational cost is extremely low compared to the relevant literature where image processing techniques are used. VIA box exploits a simple low-end microcontroller to continuously monitor the transient color, interpret the color profile, and show the glucose level. The samples used in this manuscript are made of artificial sweat samples, including the known glucose range in real sweat samples. [ABSTRACT FROM AUTHOR]

In recent years, frequency domain spectroscopy (FDS) is often used to evaluate oil paper insulation state in power transformer bushing. But it is still very difficult to evaluate the moisture content accurately and quickly. In order to solve this problem, this paper proposes an intelligent algorithm based on random forest regression (RFR) to construct an efficient evaluation method through segmented FDS curves. Furthermore, the characteristics of FDS curves were studied and the intelligent method was compared with support vector regression (SVR) and deep neural networks (DNN). The results show that the dielectric loss, the real part and imaginary part of complex capacitance all move upward with the moisture increasing, so they can be used as the input feature of the evaluation model; The moisture content evaluation accuracy of the RFR model in the whole frequency band is higher than that of SVR and DNN models; With the increase of lower cut off frequency (FDS test stop frequency), the FDS test time is greatly shortened, and the accuracy of the RFR model can still meet the evaluation requirements. Therefore, the data in a compromise frequency band can be used to evaluate the moisture content of oil paper insulation accurately and quickly. [ABSTRACT FROM AUTHOR]

The application of first-principles calculations for predicting lattice thermal conductivity (LTC) in crystalline materials, in conjunction with the linearized phonon Boltzmann equation, has gained increasing popularity. In this calculation, the determination of force constants through first-principles calculations is critical for accurate LTC predictions. For material exploration, performing first-principles LTC calculations in a high-throughput manner is now expected, although it requires significant computational resources. To reduce computational demands, we integrated polynomial machine learning potentials on-the-fly during the first-principles LTC calculations. This paper presents a systematic approach to first-principles LTC calculations. We designed and optimized an efficient workflow that integrates multiple modular software packages. We applied this approach to calculate LTCs for 103 compounds of wurtzite, zinc blende, and rocksalt types to evaluate the performance of the polynomial machine learning potentials in LTC calculations. We demonstrate a significant reduction in the computational resources required for the LTC predictions. [ABSTRACT FROM AUTHOR]

Switching Spectroscopy Piezoresponse Force Microscopy (SSPFM) stands out as a powerful method for probing ferroelectric properties within materials subjected to incremental polarization induced by an external electric field. However, the dense data processing linked to this technique is a critical factor influencing the quality of obtained results. Furthermore, meticulous exploration of various artifacts, such as electrostatics, which may considerably influence the signal, is a key factor in obtaining quantitative results. In this paper, we present a global methodology for SSPFM data processing, accessible in open-source with a user-friendly Python application called PySSPFM. A ferroelectric thin film sample of potassium sodium niobate has been probed to illustrate the different aspects of our methodology. Our approach enables the reconstruction of hysteresis nano-loops by determining the PR as a function of applied electric field. These hysteresis loops are then fitted to extract characteristic parameters that serve as measures of the ferroelectric properties of the sample. Various artifact decorrelation methods are employed to enhance measurement accuracy, and additional material properties can be assessed. Performing this procedure on a grid of points across the surface of the sample enables the creation of spatial maps. Furthermore, different techniques have been proposed to facilitate post-treatment analysis, incorporating algorithms for machine learning (K-means), phase separation, and mapping cross correlation, among others. Additionally, PySSPFM enables a more in-depth investigation of the material by studying the nanomechanical properties during poling, through the measurement of the resonance properties of the cantilever–tip–sample surface system. [ABSTRACT FROM AUTHOR]

This Special Issue presents 7 papers selected from the International Conference on Futuristic Advancements in Materials, Manufacturing and Thermal Sciences (ICFAMMT 2022). These papers were presented during the International Conference on Futuristic Advancements in Materials, Manufacturing and Thermal Sciences (ICFAMMT 2022) and selected by Session Chairs and Scientific Committee members for the possible publication in the Special Issue of Heat Transfer Engineering. In this special issue, the first paper by Kumar et al. presents heat transfer characteristics of plate heat exchanger with bubble fin using Al SB 2 sb O SB 3 sb /water nanofluid. [Extracted from the article]

We study the quadratic cycle cover problem (QCCP), which aims to find a node-disjoint cycle cover in a directed graph with minimum interaction cost between successive arcs. We derive several semidefinite programming (SDP) relaxations and use facial reduction to make these strictly feasible. We investigate a nontrivial relationship between the transformation matrix used in the reduction and the structure of the graph, which is exploited in an efficient algorithm that constructs this matrix for any instance of the problem. To solve our relaxations, we propose an algorithm that incorporates an augmented Lagrangian method into a cutting-plane framework by utilizing Dykstra's projection algorithm. Our algorithm is suitable for solving SDP relaxations with a large number of cutting-planes. Computational results show that our SDP bounds and efficient cutting-plane algorithm outperform other QCCP bounding approaches from the literature. Finally, we provide several SDP-based upper bounding techniques, among which is a sequential Q-learning method that exploits a solution of our SDP relaxation within a reinforcement learning environment. Summary of Contribution: The quadratic cycle cover problem (QCCP) is the problem of finding a set of node-disjoint cycles covering all the nodes in a graph such that the total interaction cost between successive arcs is minimized. The QCCP has applications in many fields, among which are robotics, transportation, energy distribution networks, and automatic inspection. Besides this, the problem has a high theoretical relevance because of its close connection to the quadratic traveling salesman problem (QTSP). The QTSP has several applications, for example, in bioinformatics, and is considered to be among the most difficult combinatorial optimization problems nowadays. After removing the subtour elimination constraints, the QTSP boils down to the QCCP. Hence, an in-depth study of the QCCP also contributes to the construction of strong bounds for the QTSP. In this paper, we study the application of semidefinite programming (SDP) to obtain strong bounds for the QCCP. Our strongest SDP relaxation is very hard to solve by any SDP solver because of the large number of involved cutting-planes. Because of that, we propose a new approach in which an augmented Lagrangian method is incorporated into a cutting-plane framework by utilizing Dykstra's projection algorithm. We emphasize an efficient implementation of the method and perform an extensive computational study. This study shows that our method is able to handle a large number of cuts and that the resulting bounds are currently the best QCCP bounds in the literature. We also introduce several upper bounding techniques, among which is a distributed reinforcement learning algorithm that exploits our SDP relaxations. [ABSTRACT FROM AUTHOR]