Search

With a substantial rise in life expectancy throughout the last century, society faces the imperative of seeking inventive approaches to foster active aging and provide adequate aging care. The e-VITA initiative, jointly funded by the European Union and Japan, centers on an advanced virtual coaching methodology designed to target essential aspects of promoting active and healthy aging. This paper describes the technical framework underlying the e-VITA virtual coaching system platform and presents preliminary feedback on its use. At its core is the e-VITA Manager, a pivotal component responsible for harmonizing the seamless integration of various specialized devices and modules. These modules include the Dialogue Manager, Data Fusion, and Emotional Detection, each making distinct contributions to enhance the platform's functionalities. The platform's design incorporates a multitude of devices and software components from Europe and Japan, each built upon diverse technologies and standards. This versatile platform facilitates communication and seamless integration among smart devices such as sensors and robots while efficiently managing data to provide comprehensive coaching functionalities. [ABSTRACT FROM AUTHOR]

This paper presents a feasibility study on monitoring earthquake-caused furniture vibrations using radiofrequency identification (RFID) sensor tags. Finding unstable objects by exploiting the vibrations caused by weaker earthquakes is effective as one of the potential countermeasures for large-scale earthquakes in earthquake-prone areas. For this purpose, a previously proposed ultrahigh-frequency (UHF)-band RFID-based batteryless vibration/physical shock sensing system enabled long-term monitoring. This RFID sensor system introduced standby and active modes for long-term monitoring. This system enabled lower-cost wireless vibration measurements without affecting the vibration of furniture because the RFID-based sensor tags provide lightweight, low-cost, and battery-free operations. This RFID sensor system observed earthquake-cased furniture vibrations in a room on the fourth floor of a building eight stories high at Ibaraki University, Hitachi, Ibaraki, Japan. The observation results revealed that the RFID sensor tags identified the vibrations of furniture caused by earthquakes. The RFID sensor system also observed the vibration duration times of the objects in a room and specified the most unstable reference object. Hence, the proposed vibration sensing system helped achieve safe living in indoor environments. [ABSTRACT FROM AUTHOR]

Wireless Mesh Networks (WMNs) can build a communications infrastructure using only routers (called mesh routers), making it possible to form networks over a wide area at low cost. The mesh routers cover clients (called mesh clients), allowing mesh clients to communicate with different nodes. Since the communication performance of WMNs is affected by the position of mesh routers, the communication performance can be improved by optimizing the mesh router placement. In this paper, we present a Coverage Construction Method (CCM) that optimizes mesh router placement. In addition, we propose an integrated optimization approach that combine Simulated Annealing (SA) and Delaunay Edges (DE) in CCM to improve the performance of mesh router placement optimization. The proposed approach can build and provide a communication infrastructure by WMNs in disaster environments. We consider a real scenario for the placement of mesh clients in an evacuation area of Kurashiki City, Japan. From the simulation results, we found that the proposed approach can optimize the placement of mesh routers in order to cover all mesh clients in the evacuation area. Additionally, the DECCM-based SA approach covers more mesh clients than the CCM-based SA approach on average and can improve network connectivity of WMNs. [ABSTRACT FROM AUTHOR]

Centimeter level augmentation system (CLAS) of the quasi-zenith satellite system (QZSS) is the first precise point positioning-real time kinematic (PPP-RTK) augmentation system of the global navigation satellite system (GNSS), which is currently providing services for Japan. CLAS broadcasts the state-space representation of correction messages along with integrity messages regarding satellite faults and the quality index of each correction. In other GNSS augmentation systems, such as the space-based augmentation system (SBAS) of GNSS, the quality indices of correction messages are used to generate fault-free protection levels that represent a position bound containing a true user position with a probability of missed detections. Although the protection level equations are well defined for the SBAS, a protection level equation for the CLAS PPP-RTK service has not been rigorously discussed in the literature. This paper proposes a fault-free protection level equation for the PPP-RTK methods that considers the probability of correct integer ambiguity fixes in the GNSS carrier phase measurements as well as the CLAS correction quality messages. The computed protection levels with position errors were experimentally compared by processing the GNSS measurements from the GNSS Earth Observation Network (GEONET) stations in Japan and the L6 messages from the CLAS broadcast using the virtual reference station-real time kinematic (VRS-RTK) techniques. Our results, based on the GEONET dataset spanning 7 days, showed that the computed protection levels using the proposed equations were larger than the position errors for all epochs. In the dataset, the RMS errors of the CLAS VRS-RTK position were 4.6 and 14 cm in the horizontal and vertical directions, respectively, whereas the horizontal protection levels ranged from 25 cm to 2.3 m and the vertical protection levels ranged from 50 cm to 5.2 m based on fault-free integrity risk of 10 − 7 . [ABSTRACT FROM AUTHOR]

The gross charge distribution in an electrified cloud has already been estimated by polarity distribution of the electrostatic field on the ground surface. While either a dipole or a tripole charge structure is commonly accepted, the increase–decrease and motion of each point charge in those models are both still unclear. This paper presents a new network of electric field mills for multipoint electrostatic measurement to evaluate the temporal variations of a simple cloud charge model with second-scale resolution. Details of our newly developed equipment are described, with an emphasis on its advantages. This network was deployed in the north Kanto area of Japan and operated during the summer season in 2020. In order to simplify the relationship between cloud charge positions and the horizontal distribution of the measured electrostatic field, an isolated thundercloud is focused on. As an initial analysis, a negative point charge model is applied to an isolated cloud observed on 27 August 2020. The quantity and height of the point charge were estimated as being approximately −20 C and 7 km, respectively. The calculated charge location is generally coincident with the C-band radar echo regions. Significant correspondence is demonstrated between the intensity distribution of the electrostatic fields measured at seven sites and that calculated with estimated point charge. This result indicates the possibility to determine the amounts and positions of cloud charges inside the dipole charge structure based on multipoint measurement of the electrostatic field. [ABSTRACT FROM AUTHOR]

This paper presents the details of our research and the activities involved. Japan is one of the most advanced countries in medicine worldwide. However, in terms of technology, knowledge sharing, and successor development, Japanese medicine lags behind other developed countries, and these matters require addressing. The country is also facing a shortage of doctors, among other things, and this medical problem will surely become critical in the near future. In this study, we aim to help solve such problems from the medical engineering viewpoint, analyze and create systems based on the experience of doctors from the engineering viewpoint, and make it easy for patients to understand orthodox and general statistical analysis methods. We perform a visualization and quantitative medical data analysis and examine diagnostic support. We consider sleep apnea syndrome (SAS), and orthostatic dysregulation (OD) in children in this study. This research aims to detect SAS early, identify people with pre-SAS who are likely to become SAS in the near future, and identify OD. We analyze and identify these diseases through statistics and a multivariate analysis and create a dedicated analysis system for them. Our research and system development will allow specialists to make informed diagnoses, reproduce empirical rules, improve work efficiency, and improve patients' health awareness. This research has only looks at two diseases, but these methods can be expected to be applied to other diseases. [ABSTRACT FROM AUTHOR]

Assistive technology (AT) is any item, device, software, or product system used to enhance, maintain, or improve the functional abilities of people with disabilities. There are many people with disabilities in the world, including the visually impaired, the hearing impaired, and the physically impaired. We established the National KOSEN Support Equipment Development Network (KOSEN-AT) with technical college faculty members 10 years ago to assist these disabled and elderly people. However, Japan is facing the challenge of a rapidly aging society, and the digital transformation of assistive device development for people with disabilities has not been adequately addressed. A major reason for this is the lack of engineers in Japan who can develop products with an understanding of the needs of people with disabilities and the elderly. In this paper, we describe a new initiative of the GEAR 5.0 program, a practical engineer education program that will enable the development of assistive devices for the physically challenged and the elderly, which started in 2020 at the National Institute of Technology in Japan. We believe that it is necessary to educate technicians not only with conventional specialized skills, but also with a full understanding of the concept of disability and basic skills in assistive technology. Next, we developed "Touch Talker", a digital text reading system for the visually impaired. As a part of the GEAR 5.0 program, we conducted an evaluation experiment in which students from a technical college experienced visual impairment in the same blindfolded environment as visually impaired people to evaluate the developed assistive device. To verify its importance, we developed a digital text-to-speech system for the visually impaired, "Touch Talker", as part of the GEAR 5.0 program. We thought that by conducting evaluation experiments in the same blindfolded environment as visually impaired people, we could make technical college students aware of the difficulties of operating digital devices due to visual impairment. The results of the experiment showed that the developed "Touch Talker" was effective for both the visually impaired group and the blindfolded technical college student group. The evaluation results also showed a similar trend, confirming that the evaluation by blindfolded technical college students is effective for the development of assistive devices for the visually impaired. In addition, the technical college students who participated in the evaluation experiment were able to understand the difficulty of operating digital devices by experiencing visual impairment. It was suggested that the perspective of the people involved is important in the development of assistive devices. [ABSTRACT FROM AUTHOR]

Many cloud providers offer IoT services that simplify the collection and processing of IoT information. However, the IoT infrastructure composed of sensors and actuators that produces this information remains outside the cloud; therefore, application developers must install, connect and manage the cloud. This requirement can be a market barrier, especially for small/medium software companies that cannot afford the infrastructural costs associated with it and would only prefer to focus on IoT application developments. Motivated by the wish to eliminate this barrier, this paper proposes a Cloud of Things platform, called VirIoT, which fully brings the Infrastructure as a service model typical of cloud computing to the world of Internet of Things. VirIoT provides users with virtual IoT infrastructures (Virtual Silos) composed of virtual things, with which users can interact through dedicated and standardized broker servers in which the technology can be chosen among those offered by the platform, such as oneM2M, NGSI and NGSI-LD. VirIoT allows developers to focus their efforts exclusively on IoT applications without worrying about infrastructure management and allows cloud providers to expand their IoT services portfolio. VirIoT uses external things and cloud/edge computing resources to deliver the IoT virtualization services. Its open-source architecture is microservice-based and runs on top of a distributed Kubernetes platform with nodes in central and edge data centers. The architecture is scalable, efficient and able to support the continuous integration of heterogeneous things and IoT standards, taking care of interoperability issues. Using a VirIoT deployment spanning data centers in Europe and Japan, we conducted a performance evaluation with a two-fold objective: showing the efficiency and scalability of the architecture; and leveraging VirIoT's ability to integrate different IoT standards in order to make a fair comparison of some open-source IoT Broker implementations, namely Mobius for oneM2M, Orion for NGSIv2, Orion-LD and Scorpio for NGSI-LD. [ABSTRACT FROM AUTHOR]